USB 3.2 IP

Leveraging the benefits of USB 10Gbps and 5Gbps device controller, USB 20Gbps is designed using the FPGA built-in transceiver.
It is a one-stop solution for all USB requirements ranging from USB 3.2 to USB 2.0.
It supports SuperSpeed+ (SSP x2/x1), SuperSpeed (SS), High Speed (HS) and Full Speed (FS) communication modes.
The Core architecture allows to use minimal pins from FPGA for USB 3.2 interface with better stability.

Leveraging the benefits of USB 3.2 Gen 1 device controller, USB 3.2 Gen 2 is designed using the FPGA built-in transceiver.
It is a one-stop solution for all USB requirements ranging from USB 3.2 to USB 2.0.
It supports SuperSpeed+ (SSP), SuperSpeed (SS), High Speed (HS) and Full Speed (FS) communication modes.

Supports two lanes or one lane - easily configurable
Number of downstream ports can be easily selected
Complies with USB 3.2 standard for Super-Speed Plus(10Gbps),Super-Speed(5.0 Gbps), Hi-Speed (480 Mbps), Full-Speed (12 Mbps) and Low-Speed (1.5 Mbps).
Backward compatible with USB2.0 devices and hubs and the type A connectors.

Avery VIP for USB is a comprehensive solution for verification of USB-based designs ranging from the USB 2.0, 3.x, and 4.0 standards, including xHCI host controllers and USB mass storage class standards for UAS and BOT.
USB VIP allows users to verify their designs by developing custom tests at several levels of abstraction.

Compliant with standard USB PD Rev 3.1 V1.8, Type-C Rev2.2 & USB type C Port controller interface Rev2.0 V1.3.
Supports enabling USB4 (Gen 2/Gen 3/Gen 4) over type C Connectors.
Supports both Standard Power range (SPR) and Extended Power range (EPR) modes of operation.
Supports all Fixed voltage supply, Programmable power supply (PPS) and Adjustable Votlage supply (AVS).

Fully compliant with USB 3.2 specification version 1.1, xHCI Specification Revision 1.2, and Pipe Interface 6.1.1 with Message Bus Interface for USB3.2 Architecture with backward compatibility to USB3.1, USB3.0 and USB2.0 (including USB2.0, USB 3.0. OTG)
Supports USB Type-C.
Supports up to 128 devices including hub and device on any tier level.
Supports 15 IN and 15 OUT and 1 control endpoint for each device.

XtremeSilica’s USB 3.2 Verification IP offers a comprehensive solution for validating designs based on the USB 3.2 specification. It supports SuperSpeed+ data rates up to 20 Gbps, ensuring protocol compliance, power management, and seamless interoperability across versions.
The product’s advanced features include dynamic link negotiation validation, error injection, and robust debugging tools. It enables testing across a range of devices, ensuring high-speed data transfer and reliable performance in both legacy and modern USB designs

USB 3.0/3.1/3.2 Common support
Compliant with USB 3.0/3.1/3.2 specification
Supports Superspeed USB 3.0, SuperSpeedPlus 3.1, 3.2
Configurable number of Configurations, Interfaces, Alternative Interfaces and Endpoints

USB 3.0/3.1/3.2 Common support
Compliant with USB 3.0/3.1/3.2 specification
Supports Superspeed USB 3.0, SuperSpeedPlus 3.1, 3.2
Configurable number of Configurations, Interfaces, Alternative Interfaces and Endpoints

USB 3.0/3.1/3.2 Common support
Compliant with USB 3.0/3.1/3.2 specification
Supports Superspeed USB 3.0, SuperSpeedPlus 3.1, 3.2 and 3.0 OTG
Configurable number of Configurations, Interfaces, Alternative Interfaces and Endpoints