Oscillator IP for UMC
Welcome to the ultimate
Oscillator IP
for
UMC
hub! Explore our vast directory of
Oscillator IP
for
UMC
All offers in
Oscillator IP
for
UMC
Filter
Compare
65
Oscillator IP
for
UMC
from
7
vendors
(1
-
10)
-
Crystal Oscillators
- The crystal oscillator macros are available in a wide range of industry-standard quartz crystals and MEMS resonators operating in the fundamental mode in the 32 kHz to 80 MHz range.
- These oscillators, which are both power and area efficient, have a programmable transconductance to allow users to find the optimal balance between jitter and power consumption.
-
Free running oscillators
- Compact and low power
- No external components
- Baseline CMOS logic process masks only
- Excellent frequency precision over PVT after trimming
-
5MHz-35MHz Low Power Crystal Oscillator - TSMC 0.18µ
- 4MHz-35MHz Frequency range.
- No external bias or limit resistors required.
- Current optimization for best power at frequency.
- Amplitude control loop.
- The OSCI pad input can be used as a CMOS input for test.
- Uses single 1.8V supply.
- Enable/power down provision.
-
High-Stable Oscillator - TSMC 40nm(CLN40ULP) / UMC 55nm(LP)
- High accuracy +/-2%, +/-3%, +/-5% at Tj = -40C to +125C.
- The frequency can be adjusted from 150MHz to 160MHz.
- Reference clock is not required.
-
High Precision RC Oscillator - UMC 0.18um
- Area: NC
- Freqmax (Maximum frequency): 256MHz
- Freqmin (Minimum frequency): 4MHz
- Idd (Current consumption): 300uA
-
UMC 0.18um 1.8v 60MHz Ring Oscillator
- Process: UMC 0.18um Logic 1.8V/3.3V 1P6M Generic II Salicide process
- Supply voltage: 1.8v/3.3v
- Average current:< 600uA
- Operating temperature: -40C+25C+125C
-
UMC 0.18um 1.8v 80MHz Ring Oscillator
- Process: UMC 0.18um 1.8v/3.3v 1P6M Logic process
- Supply voltage: 1.8v/3.3v
- Average current: < 900uA
- Operating temperature: -40c~+25c~+125c