Spread Spectrum PLL IP for TSMC
Welcome to the ultimate
Spread Spectrum PLL IP
for
TSMC
hub! Explore our vast directory of
Spread Spectrum PLL IP
for
TSMC
All offers in
Spread Spectrum PLL IP
for
TSMC
Filter
Compare
195
Spread Spectrum PLL IP
for
TSMC
from
6
vendors
(1
-
10)
-
3.2GHz SSCG PLL on TSMC 12nm
- Including Loop filter
- VCO operating range : 1600MHz- 3200MHz
- Output frequency range: 400MHz- 3200MHz
- Input frequency range : 10MHz- 200MHz
-
4.3GHz SSCG PLL on TSMC 7nm
- Including Loop filter
- VCO operating range : 2000MHz-4300MHz
- Output frequency range: 500MHz-4300MHz
- Input frequency range : 10MHz- 200MHz
-
LVDS 160MHz 8-Lane PHY TX IP on TSMC 16FFC
- The CL12491M8TIP160 transmitter converts parallel RGB data and 4bits of HYNC,VSYNC,DE and Control) of CMOS parallel data into serial LVDS data streams.
- A phase-locked clock is transmitted in parallel with the data streams over a dedicated LVDS link.
- The polarity of differential signals for each data lane can be controlled.
-
General-purpose & Specialized Ring PLLs + RTL-based Solutions
- Wide functional range allows all frequencies in a system to be synthesized with one PLL macro
- Input & output frequency ranges greater than 1000:1
-
-
Aeonic Generate Clock Generation Module [PLL], 8x smaller than fractional analog solutions
- Process portable
- Proven (65nm to 3nm)
- Full SCAN testable
- Core voltage supply
-
TSMC CLN90LP 90nm Spread Spectrum PLL - 120MHz-600MHz
- Designed for PC, networking, and consumer-electronics applications where spread-spectrum clock sources are required to satisfy FCC requirements for peak RF spectral emissions.
- Bandwidth, spreading rate, and spreading amount are precisely adjustable to allow the designer to dial-in the desired characteristics.
- Feedback divider with 8 fractional bits allows the frequency to be set more precisely when the bandwidth is reduced.
-
TSMC CLN90LP 90nm Spread Spectrum PLL - 60MHz-300MHz
- Designed for PC, networking, and consumer-electronics applications where spread-spectrum clock sources are required to satisfy FCC requirements for peak RF spectral emissions.
- Bandwidth, spreading rate, and spreading amount are precisely adjustable to allow the designer to dial-in the desired characteristics.
- Feedback divider with 8 fractional bits allows the frequency to be set more precisely when the bandwidth is reduced.
-
TSMC CLN90LP 90nm Spread Spectrum PLL - 240MHz-1200MHz
- Designed for PC, networking, and consumer-electronics applications where spread-spectrum clock sources are required to satisfy FCC requirements for peak RF spectral emissions.
- Bandwidth, spreading rate, and spreading amount are precisely adjustable to allow the designer to dial-in the desired characteristics.
- Feedback divider with 8 fractional bits allows the frequency to be set more precisely when the bandwidth is reduced.
-
TSMC CLN90GT 90nm Spread Spectrum PLL - 250MHz-1250MHz
- Designed for PC, networking, and consumer-electronics applications where spread-spectrum clock sources are required to satisfy FCC requirements for peak RF spectral emissions.
- Bandwidth, spreading rate, and spreading amount are precisely adjustable to allow the designer to dial-in the desired characteristics.
- Feedback divider with 8 fractional bits allows the frequency to be set more precisely when the bandwidth is reduced.