LPDDR IP for Samsung
Welcome to the ultimate
LPDDR IP
for
Samsung
hub! Explore our vast directory of
LPDDR IP
for
Samsung
All offers in
LPDDR IP
for
Samsung
Filter
Compare
18
LPDDR IP
for
Samsung
from
5
vendors
(1
-
10)
-
High Bandwidth Memory 3 (HBM3/3E) IP optimized for Samsung SF4X
- The HBM3 IP consists of a PHY and memory controller optimized for Samsung SF4X process to support the HBM3 memory standard (JESD238A) operating at up to 9.6 Gbps/pin.
- The HBM3 IP is designed for high memory throughput and low latency applications while minimizing area and power consumption.
-
LPDDR5/4x/4 PHY IP for Samsung 14LPU
- Compliant with JEDEC standards for LPDDR5/4x/4 with PHY standards
- DFI 5.0 Interface Compliant
- Supports 1,2, or 4 ranks
- Multiple frequency states
-
LPDDR5T / LPDDR5X / LPDDR5 Controller
- Support for all LPDDR5T/5X/5 devices
- Bank management logic monitors status of each bank
- Queue-based user interface with reordering scheduler
- Look-ahead activate, precharge, and auto-precharge logic
- Parity protection for all stored control registers
- PHY interface based on DFI 5.1 standard
-
HBM2E/HBM2 PHY
- Advanced clocking architecture minimizes clock jitter
- DFI PHY Independent Mode for initialization and training
- IEEE 1500 interface, Memory BIST feature, and loop-back function
- Designed for optimized interposer routing
- Pin programmable support for lane repair
-
LPDDR4 multiPHY V2 - SS 8LPU
- Supports JEDEC standard LPDDR4X, LPDDR4, LPDDR3, DDR4, DDR3, and DDR3L (1.35V DDR3) SDRAMs
- Support for data rates up to 4,267 Mbps (process dependent)
- Designed for rapid integration with Synopsys Enhanced Universal DDR Memory/Protocol Controllers (uMCTL2/uPCTL2) for a complete DDR interface solution
- PHY independent, firmware-based training using an embedded calibration processor
-
LPDDR4 multiPHY V2 - SS 8LPP for Automotive AEC-Q100 Grade 1
- Supports JEDEC standard LPDDR4X, LPDDR4, LPDDR3, DDR4, DDR3, and DDR3L (1.35V DDR3) SDRAMs
- Support for data rates up to 4,267 Mbps (process dependent)
- Designed for rapid integration with Synopsys Enhanced Universal DDR Memory/Protocol Controllers (uMCTL2/uPCTL2) for a complete DDR interface solution
- PHY independent, firmware-based training using an embedded calibration processor
-
LPDDR4 multiPHY V2 - SS 8LPP
- Supports JEDEC standard LPDDR4X, LPDDR4, LPDDR3, DDR4, DDR3, and DDR3L (1.35V DDR3) SDRAMs
- Support for data rates up to 4,267 Mbps (process dependent)
- Designed for rapid integration with Synopsys Enhanced Universal DDR Memory/Protocol Controllers (uMCTL2/uPCTL2) for a complete DDR interface solution
- PHY independent, firmware-based training using an embedded calibration processor
-
LPDDR4X multiPHY - SS 14LPP18
- Supports JEDEC standard LPDDR4X, LPDDR4, LPDDR3, DDR4, DDR3, and DDR3L (1.35V DDR3) SDRAMs
- Support for data rates up to 4,267 Mbps (process dependent)
- Designed for rapid integration with Synopsys Enhanced Universal DDR Memory/Protocol Controllers (uMCTL2/uPCTL2) for a complete DDR interface solution
- PHY independent, firmware-based training using an embedded calibration processor
-
LPDDR4 multiPHY V2 - SS 14LPP
- Supports JEDEC standard LPDDR4X, LPDDR4, LPDDR3, DDR4, DDR3, and DDR3L (1.35V DDR3) SDRAMs
- Support for data rates up to 4,267 Mbps (process dependent)
- Designed for rapid integration with Synopsys Enhanced Universal DDR Memory/Protocol Controllers (uMCTL2/uPCTL2) for a complete DDR interface solution
- PHY independent, firmware-based training using an embedded calibration processor
-
LPDDR4X multiPHY - SS 11LPP
- Supports JEDEC standard LPDDR4X, LPDDR4, LPDDR3, DDR4, DDR3, and DDR3L (1.35V DDR3) SDRAMs
- Support for data rates up to 4,267 Mbps (process dependent)
- Designed for rapid integration with Synopsys Enhanced Universal DDR Memory/Protocol Controllers (uMCTL2/uPCTL2) for a complete DDR interface solution
- PHY independent, firmware-based training using an embedded calibration processor
