Oscillator IP for GLOBALFOUNDRIES

Compare 34 Oscillator IP for GLOBALFOUNDRIES from 11 vendors (1 - 10)

10 to 40 MHz crystal oscillator
- Supply voltage 3.3V
- Output frequency 10-40MHz
- GF 180nm MCU CMOS technology
100 MHz RC oscillator
- Global Foundries CMOS 55nm
- Low current consumption
- Low temperature dependence
- High accuracy (after trimming)
10 MHz RC oscillator
- Global Foundries CMOS 55nm
- Low current consumption
- Low temperature dependence
- High accuracy (after trimming)
1.024 MHz RC oscillator
- Global Foundries CMOS 55nm
- Low current consumption
- Low temperature dependence
- High accuracy (after trimming)
Free running oscillators
- Compact and low power
- No external components
- Baseline CMOS logic process masks only
- Excellent frequency precision over PVT after trimming
NFC Power Management Unit (0.6/1.2/1.5 V output voltage, 10/20/50 uA output current, 2 MHz output clock frequency)
- 0.6/1.2/1.5 V output voltage, 10/20/50 uA output current, 2 MHz output clock frequency
- GF 130nm Embedded EEPROM technology process
- Reverse current protection
High Performance Fractional-N RF Frequency Synthesizer PLL in GlobalFoundries 22FDX for 5G, WiFi, etc
- Ultra-low jitter, less than 300fs RMS integrated between 12kHz to 20MHz.
- Suitable for many RF applications, including LO, clocks for, ADC, DAC, high-speed PHY
- Small die area (< 0.05 sq mm), using a LC tank oscillator
- Output frequency can be from 1 to 2047 times the input reference, up to 8GHz
High Performance Fractional-N RF Frequency Synthesizer PLLs for 5G, WiFi, etc
- Fractional-N digital PLL architecture, using an LC-tank oscillator
General Purpose Fractional-N PLL in GlobalFoundries 22FDX
- Super small: 80 x 80 microns!
- Very low power: 12-mW
- Broad frequency range: 6-GHz
4-GHz Jitter-optimized low-power digital PLL
- - Jitter below 10-ps
- - Super small: 90 x 90 microns!
- - Very low power: 15-mW
- - Broad frequency range: 4-GHz