NFC Power Management Unit (0.6/1.2/1.5 V output voltage, 10/20/50 uA output current, 2 MHz output clock frequency)

Overview

130GF_PMU_02 is a Power Management Unit (PMU) block designed to supply embedded integrated circuits with stable and precise voltage and current. IP should derive it’s operating power from rectifier or external DC voltage source (Battery assisted operation).
PMU block consists of:
- 2 identical low drop out voltage regulators (LDO);
- Voltage and current reference source;
- Power-On-Reset module (POR) for each voltage regulator;
- Power-OK input voltage monitoring with 4 threshold (POK);
- 2 MHz oscillator.

Key Features

GF 130nm Embedded EEPROM technology process
Reverse current protection
Two low drop out voltage regulators (capless solution)
Embedded Power-On-Reset module
Embedded 2MHz oscillator
Low-noise bandgap reference and low-noise current reference
Input voltage monitor with 4 thresholds
Battery assisted operation

Applications

Access control systems
RFID systems, smart cards
Electronic devices with battery power
Chip serial ID and chip safety

Deliverables

Schematic or NetList
Abstract view (.lef and .lib files)
Layout (optional)
Verilog behavior model
Extracted view (optional)
GDSII
DRC, LVS, antenna report
Test bench with saved configurations (optional)
Documentation

Technical Specifications

Foundry, Node

Global Foundries Embedded EEPROM 0.13 um

Maturity

pre-silicon verification

Availability

Now

GLOBALFOUNDRIES

Pre-Silicon: 130nm

Request Info