10-Bit DAC IP

Compare 85 10-Bit DAC IP from 20 vendors (1 - 10)

10-bit Current DAC
- The WEA10IDA45 is a 10-bit current DAC
- It accepts a current input of 4 uA and is capable of sinking and sourcing current up to 4 mA The DAC output has 1023 sink and 1023 source settings that is programmed using a parallel 10-bit digital bus
- The current DAC output can be switched to high impedance state
- The iDAC operates from a power supply ranging from 1.8 V to 3.0 V
8/10-bit Digital-to-Analog Converter
- The agileDAC GP is a digital-to-analog converter that uses a traditional capacitive DAC architecture.
- The agileDAC uses its own internal reference voltage.
- The architecture can achieve up to 10-bit resolution at sample rates up to 16 Msps.
10-bit 1-channel constant power DAC
- iHP SiGe BiCMOS 0.25 um
- Single 2.5 V supply voltage
- 22 mA full scale output current
- 0°C to 100°C operation
10-bit 1-channel constant power DAC
- iHP SiGe BiCMOS 0.25 um
- Single 2.5 V supply voltage
- 22 mA full scale output current
- 0°C to 100°C operation
10-bit 1-channel 100 MHz current DAC
- SMIC EEPROM CMOS 0.18 um technology
- Resolution 10 bits
- 100 MSPS update rate
- High spurious free dynamic range performance up to 25 MHz output
10-bit 1-channel constant power DAC
- iHP SiGe BiCMOS 0.25 um
- Single 2.5 V supply voltage
- 22 mA full scale output current
12-bit 1-channel up to 1 MSPS R/2R DAC
- TSMC CMOS 90 nm
- Resolution 12 bit
- Single channel
- Different power supplies for digital (1.0 V) and analog (1.8 V) parts
10-bit 1-channel 1 to 100 MSPS current DAC
- TSMC CMOS 90 nm
- Dual DAC
- Resolution 10 bit
- 100 MSPS update rate
10-bit Video DAC
- This Video DAC specifies a 3-channel 10-bit resolution, high performance, low power CMOS Digital-to-Analog Converter (DAC) which offers exceptional direct current and alternating current performance and supports update rate up to 240MSPS with a stand-by mode to reduce the power dissipation.
- The segmented current steering architecture is combined with a proprietary switching technique to reduce spurious components and enhance dynamic performance. Edge-triggered input latch and temperature compensated bandgap reference have been integrated to provide a complete monolithic DAC solution.
65nm 10bit 250MSPS DAC
- 65nm 1P6M CMOS technology
- 10-bit resolution
- Maximum 54MHz conversion rate