Partnership With TSMC Yields First Silicon Success on Altera's 90-nm, Low-k Products
San Jose, Calif., June 30, 2004— Altera Corporation (NASDAQ: ALTR) today announced that it achieved first silicon success with the initial member of the Stratix® II FPGA as a result of its close collaboration with TSMC. The Stratix II family, along with the recently announced Cyclone™ II family, is built on TSMC’s Nexsys™ 90-nm process, featuring all-layer copper interconnect and Applied Materials’ production-qualified Black Diamond® low-k dielectric films. After more than three years of extensive collaboration, which paralleled the successful ramp of Altera® devices using TSMC’s 0.13-micron process, the release of the first 90-nm Stratix II devices reinforces that Altera and TSMC have developed a well-defined, proven production methodology.
“We have followed a strict ‘design for manufacturability’ methodology developed with TSMC, to address lithography issues, process margins, and power management requirements,” said Francois Gregoire, vice president of technology at Altera. “Both partners have a firm commitment to excellence in delivering product to customers. We started a process three years ago that included evaluating low-k and building 90-nm test chips that validated all aspects of the technology. As a result of this systematic work with TSMC, we are very confident in the smooth rollout of our 90-nm devices.”
Stratix II devices are the only high-performance, high-density FPGAs available to customers on 90-nm with low-k. In addition to offering higher performance, low-k dielectrics are expected to be the standard for mainstream 90-nm processes, resulting in better yields and lower costs. Because of TSMC’s early qualification of all-copper and low-k processes at the 0.13-micron node, the foundry observed no new materials challenges at the 90-nm node. The result of this approach is validated by this month’s smooth rollout of the Altera Stratix II EP2S60 device to customers.
“Because FPGAs are increasingly being used in production as system-level components, customers count on us to deliver parts when we say we will,” said Erik Cleage, Altera’s senior vice president of marketing. “Altera’s ability to meet its commitments to customers is due in large part to the successful partnership we have with TSMC.”
In their collaboration, the two partners developed and ran multiple test chips to optimize transistor characteristics and interconnect performance on TSMC’s Nexsys 90-nm technology. The goal of the collaboration was to address and resolve the 90-nm and low-k challenges before going into production. Additionally, in contrast to other companies that are struggling to build small devices on the 90-nm process, Altera’s choice of starting with a larger density device to rapidly debug the process has proved to be the correct strategy. This methodology is expected to ensure a production ramp that is capable of supporting Altera’s customer demand, while allowing TSMC to leverage their work with FPGAs into further successes with their customers.
“Our work over the years with Altera has resulted in a number of innovations and successes, including copper interconnect and low-k dielectrics. TSMC remains the only foundry with two generations of low-k and copper-based process technology in production,” said Genda Hu, TSMC vice president of marketing. “With a multitude of customer products in various stages of design and production, plus two 300-mm fabs ramping 90-nm to volume, TSMC is poised to lead the industry at this advanced technology node.”
>About the Stratix II Device Family
Featuring an innovative new logic structure, Stratix II devices offer over twice the logic density and 50 percent higher performance at 40 percent lower cost than first-generation Stratix devices. Stratix II devices offer more than double the logic density and are 50 percent faster compared to the nearest competitive devices. The new logic structure allows designers to conserve device resources by packing more functionality into a smaller area. For more information about Stratix II devices, please visit www.altera.com/stratix2.> <>
About Altera
Altera Corporation (NASDAQ: ALTR) is the world’s pioneer in system-on-a-programmable-chip (SOPC) solutions. Combining programmable logic technology with software tools, intellectual property, and technical services, Altera provides high-value programmable solutions to approximately 14,000 customers worldwide. More information is available at www.altera.com.>
###
Related Semiconductor IP
- Very Low Latency BCH Codec
- 5G-NTN Modem IP for Satellite User Terminals
- 400G UDP/IP Hardware Protocol Stack
- AXI-S Protocol Layer for UCIe
- HBM4E Controller IP
Related News
- Dolphin Integration first to achieve 0.84 pA per bit in SpRAM at the 90 nm uLL embedded flash process
- Dolphin Integration announces the availability of the new generation of SpRAM generator at 90 nm and 55 nm eFlash
- Mikron Licenses Cadence Physical Verification System and QRC Extraction Solutions for 90 nm IC Design Flow
- Dolphin Integration announce the availability of the TSMC sponsored sROMet and DpRAM generators at 90 nm LP eFlash
Latest News
- TSMC February 2026 Revenue Report
- Silvaco Announces Immediate Availability of Production Ready Mixel MIPI PHY IP, Strengthening its Comprehensive Silicon IP Offering
- Movellus Partners with Synopsys to Deliver Power Efficiency for Next Generation IC’s
- BrainChip Enables the Next Generation of Always-On Wearables with the AkidaTag© Reference Platform
- eSOL and Quintauris Partner to Expand Software Integration in RISC-V Automotive Platforms