Power Management IP for GLOBALFOUNDRIES
Welcome to the ultimate Power Management IP for GLOBALFOUNDRIES hub! Explore our vast directory of Power Management IP for GLOBALFOUNDRIES
All offers in
Power Management IP
for GLOBALFOUNDRIES
Filter
Compare
83
Power Management IP
for GLOBALFOUNDRIES
from 17 vendors
(1
-
10)
-
Power and Clock Generation IP - GLOBALFOUNDRIES® 22FDX®
- Tightly integrated power management platform with a soft-IP wrapper around Analog / Mixed-Signal hard macros which generate all supply voltages and clock signals needed to run highly efficient SoCs in GlobalFoundries® 22FDX®.
- Running from only one supply voltage and reference clock, the IP generates its own internal supplies and references, and those needed to run the Racyics® ABX® Generator.
-
Automotive Grade 1 – 1.8V LDO Voltage Regulator on GLOBALFOUNDRIES 22FDX-AG1
- Wide input voltage range
- Easy to integrate with no additional components or special power requirements
- Easy to use and configure
- Programmable output level
-
Automotive Grade 1 – Power On Reset on GLOBALFOUNDRIES 22FDX-AG1
- Integrated voltage and time references for precision stand-alone operation
- Easy to integrate with no additional component or special power requirements
- Easy to use and configure
- Programmable hysteresis, with independent programming available for power-on and power-off levels,
-
ABX® Automotive Adaptive Body Biasing Generator - GLOBALFOUNDRIES 22FDX
- RI_ABB_GF22FDX_AM is an adaptive body bias voltage generator for automotive applications in Globalfoundries 22FDX® technology.
- It contains a closed loop body bias regulation loop to generate N-well and P-well bias voltages for compensation of process, voltage and temperature (PVT) variations during operation.
- This results in up to 76% leakage power improvement for automotive grade-1 applications up to 150°C junction temperature.
-
CC-100IP-RF Analog and RF Sensitivity Enhancement IP
- Enhances the Sensitivity of Analog and RF Frontend Receivers
- Enhances the PSRR od Analog and RF Frontend Receivers
- Occupies the same on chip area as standard DCAPs with at least a 600X effective capacitance increase
- Up to a 36% Dynamic Power and RF Emissions Reduction
-
10mA to 265mA Linear Li-Ion Battery Charger - GlobalFoundries - 0.130um BCD
- This IP performs a controlled charging process of a Li-Ion battery and provides a regulated voltage to the system.
- The charging current can be digitally adjusted from 10mA up to 265mA.
- The current provided to the system can also be digitally adjusted up to 440mA.
-
Low Drop-Out Linear Regulator
- The agileLDO is a linear Low Drop-Out voltage regulator (LDO) providing precision and programmable voltage regulation.
- The regulator architecture provides a high dynamic performance making it suitable for demanding digital applications.
- Whilst the low noise and high PSRR lends itself to powering noise-sensitive analog circuits.
-
5mA LDO voltage regulator (output voltage value 1.15V/1.2 V/1.25V/1.3V) with BG (0.6V) and I2V (5uA, 10uA, 20uA, 50uA)
- Global Foundries 0.13 um CSOI
- Input voltage range from 1.3V to 2.0V
-
NFC Power Management Unit (0.6/1.2/1.5 V output voltage, 10/20/50 uA output current, 2 MHz output clock frequency)
- 0.6/1.2/1.5 V output voltage, 10/20/50 uA output current, 2 MHz output clock frequency
- GF 130nm Embedded EEPROM technology process
- Reverse current protection
-
Up to 3mA LDO voltage regulator (output voltage value 1.2 V)
- Globalfoundries Embedded EEPROM 130 nm
- Low drop out
- Low current consumption 30uA
