IGAADCX03A is a one-channel general-purpose analog-to-digital converter with 10-bit resolution and the sampling rate can be up to 4 MHz. The converted digital code is represented by unsigned binary format.
IGAADCX03A contains one 10-bit ADCs, input buffer and parallel interfaces. Two reference voltages, VREFP and VREFN, are used to define the ADC input full swing. The analog input signal of ADC is single-ended 1.8 Vppd which command mode voltage is 0.9 V. Power-down mode is available to disable the ADC and cut-off the power supplies to this IP.
IGAADCX03A is fabricated in TSMC 7 nm 0.75 V/1.8 V CMOS LOGIC FinFET Process. The dual supply voltage is 0.75 V used for digital circuit and 1.8 V used for analog circuit.
TSMC CLN7FF 10-Bit 4Msps SAR ADC [12ch]
Overview
Key Features
- TSMC 7 nm 0.75 V/1.8 V CMOS LOGIC FinFET Process?
- Metal scheme: 1P8M (1X_h_1Xa_v_1Ya_h_4Y_vhvh)
- 10-bit resolution
- INL < +/-3 LSB, DNL < +/-2 LSB
- Sampling rate up to 4 MHz
- Single-end input sampling is available
- Analog input swing: 1.8 Vppd
- Unsigned binary format
- Power-down mode available
- Operating junction temperature: -40 °C to 125 °C
- Special layer and device type:
- Core device: nch / pch
- IO device: nch_18 / pch_18
- Poly resistor: high R resistor (rhim)
- BJT: PNP
- IP GDS size (target): 500 um (width) x 300 um (height)
Technical Specifications
Foundry, Node
TSMC 7nm CLN7FF
Maturity
Pre-silicon
TSMC
Pre-Silicon:
7nm