VeriSilicon SMIC 0.15um 1.5V/3.3V SSTL3 I/O Cell Library developed by VeriSilicon is optimized for Semiconductor Manufacturing International Corporation (SMIC) 0.15um Logic 1P7M Salicide 1.5/3.3V process. This library is fully compliant with the EIA/JEDEC standard, JESD8-8 Stub Series Terminated Logic for 3.3 Volts (SSTL_3).
The SSTL3 provides MOS push-pull interface designs and is especially optimized for major memory applications. It is intended to improve operation in situations where busses must be isolated from relatively large stubs. Comparing to the LVTTL solution, SSTL3 has the advantages of lower voltage swing, lower power dissipation and higher immunity to generated noise because of the differential receiver.
There are two classes of output specifications for SSTL3, class I and class II, which are distinguished by drive requirements and application. Class I is basically applied for point-to-point configuration, such as network applications, and Class II is mostly applied for 266MHz DDR SDRAM signaling.
SMIC 0.15um SSTL3
Overview
Key Features
- SMIC 0.15um Logic 1P7M Salicide 1.5V/3.3V process
- 1.5V core and 3.3V External interface
- Meet SSTL3 DC input levels and SSTL3 AC output levels
- Cell count: 21 cells, which are 8 pad body, 2 power cut cells, 1 corner cell, 8 fillers, 2 pad heads
- Pad pitch: 35um
- Cell height: 246um
- Suitable for five, six, seven metal layers physical design
- Easy interface with VeriSilicon SMIC 0.15um process standard I/O libraries
Deliverables
- Databook in electronic format
- Verilog models and Synopsys synthesis models
- Candence Silicon Ensenble Abstracts (LEF), Avanti! Apollo data, GDS II,
- LVS netlist
Technical Specifications
Foundry, Node
SMIC 0.15um
Maturity
GDS ready
Availability
Now
SMIC
Pre-Silicon:
150nm
G
,
150nm
LV