Low frequency XTAL oscillator optimized for low power
Overview
The Always-On domain, over which the power islets emerge, requires a specific panoply of clocks. The availability of extremely low power oscillators is therefore a must.In low power modes, low speed clocks are generally used. The qOSC-XTAL-LP-32k-co.01 - low frequency crystal oscillator - is an excellent choice for application combining the needs of high accuracy on the always-on clock and an ultra-low power consumption.
Key Features
- Low power consumption: support of low power and backup modes
- High accuracy: can operate in various environment thanks to its outstanding stability over a large range of temperature
- A cost-efficient solution: no external component is needed (except a quartz) thanks to on-chip integrated capacitors.
- A flexible solution: users have the possibility to add capacitors depending on the external crystal selected for a better frequency fitting
- By-Pass Mode: the oscillator could be by-passed during tests
Block Diagram
Technical Specifications
Foundry, Node
GlobalFoundries 22nm FDX
Maturity
Pre-silicon
GLOBALFOUNDRIES
Pre-Silicon:
22nm
FDX
Related IPs
- I2C Controller IP – Slave, SCL Clock only, principally for configuring registers in mixed-signal ICs with low noise or low power requirements
- I2C Controller IP – Slave, SCL Clock, Parameterized FIFO, APB Bus. For low power requirements in I2C Slave Controller interface to CPU
- Low frequency XTAL oscillator optimized for low power
- Low frequency XTAL oscillator optimized for low power
- Low frequency XTAL oscillator optimized for low power
- Ultra low power 32.768 kHz crystal oscillator