In addition to adhering to HDMI 2.0 and 1.4 specifications, IP solutions for HDMI Transmitter (TX) devices offer the essential logic required to create and assess designs for a range of applications. The silicontested, power- and area-optimized IP solutions also comprise additional IP in addition to a variety of programmable digital controllers and high-speed mixed-signal PHY IP. The IP solutions offer the highest level of content protection across the HDMI 2.0 interface or ultra-high definition multimedia SoCs because they are HDMI 2.0 and HDCP 2.2 certified with embedded security modules.
HDMI 2.0 Tx PHY & Controller IP, Silicon Proven in TSMC 28HPC+
Overview
Key Features
- HDMI version 2.0b compliant transmitter
- Supports CEA-861F/VESA DMT up to 4K2K resolution@60fps
- Supports 3D formats (Frame packing/Side by Side Half/Top & Bottom)
- Wide range channel speed up to 6.0Gbps
- Deep Color Mode support at 24, 30, and 36 bit per pixel
- Supports HDR packets
- Programmable color space converter includes BT601/709/2020(NonConst)/RGB/xvYCC
- Adjustable analog characteristics Output swing voltage
- PLL bandwidth
- VCO gain BGR voltage
- Analog Monitor Port to probe internal analog nodes
- Support Built-in Scan Test & Loop-back Test
- 1.8V/0.9V power supply
- PHY Specifications :
- Channel bandwidth: 250Mbps~ 6.0Gbps per channel
- Programmable analog characteristics:
- Output swing voltage
- Pre-emphasis strength
- PLL band width
- VCO gain
- BGR voltage
- Testability:
- Loop-back test
- PLL only test
- Built-In-Self-Test
- Link Specifications :
- Supported HDMI standard:
- HDMI-2.0b (HDMI-1.4b), HDCP 2.2 / HDCP 1.4
- Supported Video formats:
- 3D formats with Frame Packing/Side by Side Half/Top & Bottom
- Compliant with EIA/CEA-861F / VESA DMT
- Deep Color: 24bit, 30bit, 36bit supported
- Supported Audio formats:
- Standard S/PDIF for stereo and compressed audio up to 192Khz
- PCM, Dolby digital, DTS digital audio transmission through 4bit I2S up to 8 channels
- High-Bit-Rate compressed audio formats
- IEC60958 or IEC61937 compatible
- Support HDR Packets:
- Colour Space Conversion:
- ITU-R BT601/709/2020 NonConst/RGB Full/RGB Limit/xvYCC
- YCbCr422/YCbCr444/RGB to YCbCr420
- Host interface:
- AMBA APB v2.0 32bit / I2C interface
- Silicon Proven in TSMC 28HPC+
Benefits
- Optimized for low power and small area.
- Silicon-proven High-Definition Multimedia Interface (HDMI) TX IP includes PHY and controllers.
- HDMI 2.0 and HDCP 2.2 certified.
- Support for key HDMI 2.0 features such as 4K .x 2K resolution at 60 Hz frame
- Fully compliant with HDMI 2.0/1.4 specifications with all required features.
Deliverables
- RTL Code
- GDS2
- Documentations included Link and PHY specifications
- SoC integration guidelines
- Board level design guidelines to pass HDMI certification
Technical Specifications
Foundry, Node
TSMC 28HPC+
Maturity
In Production
Availability
Immediate
Related IPs
- DDR4/ LPDDR4/ DDR3L PHY IP - 1866Mbps (Silicon Proven in TSMC 28HPC+)
- HDMI 2.0 Tx PHY & Controller IP, Silicon Proven in ST 28FDSOI
- HBM3 Solution enabling access to HBM3 Controller and HBM3 PHY in TSMC N5 1.2V
- HBM3 V2 Solution enabling access to HBM3 Controller and HBM3 PHY in TSMC N3E
- DDR3/ DDR3L Combo PHY IP - 1600Mbps (Silicon Proven in UMC 40LP)
- HDMI 2.0 Tx PHY & Controller IP, Silicon Proven in UMC 28HPC