Dual RSDS Transmitter, 30-bit color, 40-300Mb/s (SVGA/UXGA/full HDTV) LCD & Plasma display

Overview

This RSDS Transmitter interface IP is based on RSDS “Intra-Panel” Interface Specification rev1.0, dated May 2003 that allow the transfer of digital display data between a Timing Control source (TCON) and Column Drivers of a Flat Panel Display.

The transmitter converts up to 30-bit DDR CMOS data (single pixel 24-bit, single pixel 30-bit, dual pixel 24-bit, dual pixel 30-bit color) into 30 RSDS, (Reduced Swing Differential Signaling) data streams.

At a maximum dual pixel rate of 150Mhz, RSDS data line speed is 300Mbps, providing a total throughput of 9Gbps (1.125GygaBytes per second).

All the data input/output are independent from each other and can be assigned following any partitioning to support all LCD and Plasma display panel system architectures. (RGB, front/back, even/odd, mixed RGB etc…)

Each pixel channel has 3 identical clock outputs. Strength of the RSDS I/Os can be adjusted from 2mA nominal to 4mA in order to support both 100 and 50 termination. Tree extra clock output are also provided.

For convenient routing when TCON is mounted on top or bottom of a display panel, a selectable output data mapping is usually available. LSB or MSB of both channels can be forced to High-Z in order to support 24-bit data color.

This IP can interface with both 1.8V or 3.3V core logic, giving more flexibility for the design.

Key Features

  • • 20 to 150 Mhz Pixel rate per channel ( 40 to 300 Mb/s SDR input, 40 to 300 Mb/s DDR output )
  • • 30 DATA + 9 RSDS CLK channels
  • • Complies with RSDS “Intra-Panel” Interface Specification rev1.0, May 2003.
  • • 1P6M layout structure based on 0.18um 1P6M generic logic process.
  • • 3.3V/1.8V 10% supply voltage, -40/+125C
  • • For either 3.3V only or 1.8V/3.3V design.
  • • Dual pixel architecture up to 9Gbps bandwidth
  • • Low EMI
  • • 30 and 24 Bits color & reverse output mapping support
  • • Self Power-On-Reset feature
  • • Precise RSDS clock skew adjustment using DLL
  • • Phase-shifted clock output to core to support additional CD control signals
  • • Accurate output current digital control
  • • Built-in power pads with ESD protection
  • • Low leakage power-down mode <10uA.
  • • Low power consumption, [contact us] mA nominal.
  • • Very compact cell area: [contact us].

Benefits

  • Low cost IP
  • reliability
  • highly adjustable
  • customization for your own design
  • support full HDTV

Deliverables

  • Design kit includes :
    • LEF view and abstract gdsII
    • Verilog HDL behavioral model
    • Liberty (.lib) timing constraints for typical, worse and best corner case
    • Full Datasheet /Application Note with integration guidelines document
    • Silicon characterization report when available

Technical Specifications

Maturity
silicon
Availability
now
SMIC
Pre-Silicon: 180nm G
Silicon Proven: 180nm G
Silterra
Pre-Silicon: 180nm
Silicon Proven: 180nm
TSMC
Pre-Silicon: 180nm G
UMC
Pre-Silicon: 180nm
×
Semiconductor IP