DDR5/4 PHY V2 in TSMC (N7, N6, N5)

Overview

The Synopsys DDR5/4 PHY is a complete physical layer IP interface (PHY) solution for ASIC, ASSP, and system-on-chip (SoC) applications requiring high-performance DDR5/4 SDRAM interfaces operating at up to 8400 Mbps. The Synopsys DDR5/4 PHY is ideal for systems that require high- speed, high-performance, and high-capacity memory solutions, typically using registered and load reduced memory modules (RDIMMs and LRDIMMs) with up to 4 physical ranks. Direct SDRAM on PCB systems are also supported.
Optimized for high performance, low latency, low area, low power, and ease of integration, the Synopsys DDR5/4 PHY is provided as a hard DDR PHY that is primarily delivered as GDSII including integrated application-specific DDR5/4 I/ Os. Supporting the GDSII-based PHY is the RTL-based PHY Utility Block (PUB) that includes PHY control features such as read/write leveling, data eye training, per-bit data deskew control, PVT compensation, and support for production testing of the DDR5/4 PHY. The PUB also includes an embedded calibration processor to execute hardware-assisted, firmware-based training algorithms.
The DDR5/4 PHY includes a DFI 5.0 interface to the memory controller and can be combined with Synopsys’ DDR5/4 controller for a complete DDR interface solution.

Key Features

Low latency, small area, low power
Compatible with JEDEC standard DDR5 SDRAMs up to 8400 Mbps
Compatible with JEDEC standard DDR4 SDRAMs up to 3200 Mbps
DFI 5.0 compliant interface to the memory controller
I/Os include receiver decision feedback equalization (DFE)
PHY independent, firmware-based training using an embedded calibration processor
Can be trained for up to four distinct states/frequencies to permit fast frequency changes between the four frequencies
Three inactive idle states:
Voltage and temperature compensated delay lines used for:
Supports the following training features:
Programmable Read/Write Preamble
Includes a low-jitter PLL for both PHY clock generation and SDRAM clock generation
Supports PHYs on any side of the die and L-shaped PHYs that go around the die-corner
Includes the PHY Utility Block (PUB)
At-speed loopback testing on both the address and data channels
Delay line BIST and MUX-scan ATPG (stuck-at SCAN)
Firmware-based DDR5/4 2D eye mapping diagnostic tool allows measuring 2D eye for every bit of the bus at both DRAM and host receivers

Benefits

Supports JEDEC standard DDR5 and DDR4 SDRAMs
High-performance DDR PHY supporting data rates up to 8400 Mbps
PHY independent, firmware-based training using an embedded calibration processor
Supports up to 4 trained states/frequencies with <3us switching time
I/O receiver decision feedback equalization
VT compensated delay lines for DQS centering, read/write 1D (DDR4) and 2D training (DDR5), and per-bit deskew on both read and write data paths
DFI 5.0-compliant controller interface
Designed for rapid integration with Synopsys memory controller for a complete DDR interface solution

Applications

Data centers (networking and storage)
Servers
Artificial intelligence/machine learning/ deep learning
High-performance computing
Digital home
Digital office

Deliverables

Executable .run installation file which includes GDSII, LEF files, LVS netlists, .lib/.db timing models, Verilog model, DRC/LVS log files, I/O IBIS Model, I/O HSPICE netlist, parameterized Verilog top-level PHY netlist files, sample Verification Environment, PHY data book, physical implementation guide, app notes, verification guide, installation guide, and implementation checklist
PUB includes Verilog code, Synthesis/ STA constraints and scripts, sample verification environment, and data book
Implementation Guide, Application notes, and quick start manuals
Firmware for training, ATE test and diagnostics
DDR PHY compiler
Support for PHY emulation
Optional deliverables include:
Signal integrity consulting services
PHY hardening consulting services
Subsystems consulting services
IP Prototyping kit for FPGA-based prototyping

Technical Specifications

Foundry, Node

TSMC N7, N6, N5 - FF

Availability

Contact the Vendor

TSMC

Pre-Silicon: 5nm , 6nm , 7nm

Request Info