Camera Combo Receiver - 5.0Gbps 8-Lane - TSMC 12FFC, 7FF

Overview

Key Features

• SLVS-EC ver.2.0 / MIPI D-PHY ver1.2 compliant
• Supporting for four kind Differential Input Signals
  • 1) SLVS-EC(Maximum 5.0Gbps)
  • 2) MIPI D-PHY(Maximum 2.5Gbps)
  • 3) sub-LVDS(Maximum 1.0Gbps)
  • 4) CMOS 1.8V(Maximum 166MHz)
• Xtal Input Clock Frequency Selectable
• 25MHz /50MHz /75MHz /37.125MHz /54MHz /24MHz /48MHz / 72MHz
• Maximum Input Data Frequency ~5.0Gbps
• Maximum Output Clock Frequency
  • ~250MHz @ SLVS-EC, Select parallel data bus width to 20bit
  • ~312.5MHz @ MIPI D-PHY
• Power Supply: Vcc=1.8V (IO and Analog)
  • The core voltage is determined by the process node.(Inside Core)
• Maximum Lane Number: 24-Lane (8-Lane, 16-Lane also available)
• Including Power Down Mode

Benefits

• This IP is supported almost CMOS Image Sensor. Thus if when the customer want to use customer's LSI other system set, the customer don't need to change IP, because this IP can change Interface type to same PAD for changing mode pin.
• The system customer can select from many CMOS image sensor for using out IP.
• We are updating CMOS Image Sensor model number of verify operation for getting information from customer and ourselves at all time.
• If the customer need combo Link-layer, we can provide them and can support system.
• We are provided CIS and TX Verilog Model. Thus the customer can confirm function by verilog simulation status.
• This IP can be implemented in 8-lane units and can be tailored to meet customer specifications.

Technical Specifications