RFID IP
Filter
Compare
35
IP
from
7
vendors
(1
-
10)
-
UHF RFID tag IP with 3.6kBit EEPROM and -18dBm sensitivity
- 130GF_RFID_EPCGen2_01 IP is intended for use in passive UHF transponder applications.
- IP derives its operating power from an RF electromagnetic field generated by a reader, which is received and rectified by the IP.
- The tag IP sends the answer back to the reader using a backscatter modulation technique.
-
UHF Passive RFID Front-End - EPCGlobal Class 1 Gen 2/ISO18000-6C Compliant
- This macro-cell is an ultra low power analog/RF front-end core designed for SilTerra 0.18μm CMOS technology.
- It is ideal for use in passive UHF RFID integrated circuits compliant with EPCGlobal Class 1 Gen 2 / ISO18000-6C standards.
-
UHF RFID tag IP with 512bit EEPROM and -19dBm sensitivity
- 180SMIC_RFID_EPCGen2_01 IP is intended for use in passive UHF transponder applications.
- IP derives its operating power from an RF electromagnetic field generated by a reader, which is received and rectified by the IP.
- The IP tag sends the answer back to the reader using a backscatter modulation technique.
-
UHF RFID EPC Gen2V2 physical interface
- SMIC 180nm EEPROM technology
- Operating temperature range -40…+85 °C
- Operating frequency 860 - 960 MHz
- EPC Class 1 Generation 2 V2 compliant
- Two pads RF operation functionality
-
UHF RFID EPC Gen2 physical interface
- Global Foundries Embedded EEPROM 130nm
- Operating temperature range -40…+85 °C
- 2 operation modes: Passive mode and Battery assisted passive (BAP) mode
- Operating frequency 860 - 960 MHz
-
UHF RFID EPC Gen2 physical interface
- Global Foundries Embedded EEPROM 0.13 um
- Operating temperature range -40…+85 °C
-
UHF RFID tag IC with cryptographic authentication and -15 dBm sensitivity
- SMIC EEPROM CMOS 180 nm
- Passive operation – no battery needed
- Input impedance 14-j580 Ohm
-
UHF RFID tag IC with 3.6kBit EEPROM and -19.5dBm sensitivity
- GF Embedded EEPROM 130 nm
- Read sensitivity -19.5 dBm
- Write sensitivity -17 dBm
- Impedance 20-j300 Ohm @915 MHz
-
NFC wireless interface supporting ISO14443 A and B with EEPROM on SMIC 180nm
- The IP block provides the physical layer implementation of ISO 14443 interface. In particular, it includes the necessary functional devices for receiving data on the connected antenna, for the response load modulation, received and transmitted data (de)framing and parallel interface to external CPU.
- This IP also can be used for adding NFC functionality to mobile devices and other applications to perform high-level RFID protocol tasks.
-
NFC wireless interface supporting ISO14443 A and B on SMIC 180nm
- The IP block provides the physical layer implementation of ISO 14443 interface. In particular, it includes the necessary functional devices for receiving data on the connected antenna, for the response load modulation, received and transmitted data (de)framing and parallel interface to external CPU.
- This IP also can be used for adding NFC functionality to mobile devices and other applications to perform high-level RFID protocol tasks.
