Ddr4 dram IP

Compare 91 IP from 11 vendors (1 - 10)

DDR4 IO for memory PHY, 3200Mbps on SMIC 40nm
- The DDR4 IO is used to transfer the Command/Address/Clk and Data between the memory controller PHY and the DRAM device
- The TX is designed to send information from PHY to DRAM and RX is designed to receive information which is from DRAM.
DDR5 & DDR4 COMBO IO for memory controller PHY, 4800Mbps on TSMC 12nm
- The DDR5&DDR4 COMBO IO is used to transfer the Command/Address/Clk and Data between the memory controller PHY and the DRAM device
- The TX is designed to send information from PHY to DRAM and RX is designed to receive information which is from DRAM._x000D_ It supports DDR5&DDR4 interface
- The DDR5 DQ data rate can be up to 4800Mb/s, and the DDR4 DQ data rate can be up to 3200Mb/s and CA is SDR mode.
DDR4 & LPDDR4 COMBO IO for memory controller PHY, 3200Mbps on TSMC 22nm
- The DDR4&LPDDR4 COMBO IO is used to transfer the Command/Address/Clk and Data between the memory controller PHY and the DRAM device
- The TX is designed to send information from PHY to DRAM and RX is designed to receive information which is from DRAM.
Simulation VIP for DDR4 LRDIMM
- DIMM Types
- DDR4 UDIMM, RDIMM, LRDIMM, DDR4 3DS, 3DS UDIMM, 3DS RDIMM, and 3DS LRDIMM
- LRDIMM Training Modes
- Fully supports DWL, HWL, MREP, MRD, and MWD Training modes
Simulation VIP for DDR4
- Data Width, Density
- 4, 8, and 16. 2 Gb to 16 Gb
- Speed
- 1600, 1866, 2133, 2400, 2666, and 3200
DDR4 DFI Synthesizable Transactor
- Compliant with DFI version 3.0 or higher Specifications.
- DFI-DDR4 Applies to :
- DDR4 protocol standard JESD79-4, JESD79-4A, JESD79-4A_r2,JESD79-4B, JESD79-4C and JESD79-4D (draft) Specification
- Supports all Interface Groups.
DDR4 3DS Synthesizable Transactor
- Supports 100% of DDR4 3DS protocol standard JESD79-4-1, JESD79-4-1A and JESD79-4-1B
- Supports all the DDR4 3DS commands as per the specs
- Supports up to 16 GB device density
- Supports X4 and X8 devices types
DDR4 Synthesizable Transactor
- Supports 100% of DDR4 protocol standard JESD79-4, JESD79-4A, JESD79-4A_r2, JESD79-4B, JESD79-4C and JESD79-4D(Draft)
- Supports all the DDR4 commands as per the specs
- Supports up to 16GB device density
- Supports X4,X8,X16 and X32 devices
DDR4 DFI Verification IP
- Compliant with DFI version 3.0 or higher Specifications.
- DFI-DDR4 Applies to :
- DDR4 protocol standard JESD79-4, JESD79-4A, JESD79-4A_r2,JESD79-4B, JESD79-4C and JESD79-4D (draft) Specification
- Supports all Interface Groups.
DDR4 DB Memory Model
- Supports DDR4 DB devices from all leading vendors.
- Supports 100% of DDR4 DB protocol standard JESD82-32A and DDR4 Protocol standard JESD79-4B.
- Supports all the DDR4 DB commands as per the specs.
- Supports all speed grades as per specification.

DDR4 DRAM IP