IP Catalog > Memory Controller/PHY IP > SATA IP > SATA Controller IP

SATA Controller IP

Welcome to the ultimate SATA Controller IP hub! Explore our vast directory of SATA Controller IP
All offers in SATA Controller IP
Filter
Filter

Login required.

Sign in

Login required.

Sign in

Login required.

Sign in

Search (70)
Compare 70 SATA Controller IP from 19 vendors (1 - 10)
  • SATA II v2.6 Host Controller
    • The SATA II Host Controller implements an AHCI/Emulation interface that interfaces with SATA PHY using the SAPIS interface on one side and to an application on the other side using the VCI interface.
    • The emulation interface is used to be backward compatible with existing software and supports both PIO and DMA modes of operation.
    Block Diagram -- SATA II v2.6 Host Controller
  • SATA II v2.6 Device Controller
    • The SATA II Device Controller interfaces with SATA PHY using the SAPIS interface on one side and to an application on the other side using the VCI interface.
    • It supports PIO, DMA, QDMA, and FPDMA modes of operation and supports NCQ using the FPDMA mode of operation. It also supports SATA power management features
    Block Diagram -- SATA II v2.6 Device Controller
  • SATA-IP core - File system management without CPU
    • SATA IP core compliant with the Serial ATA specification revision 3.0 and work on AMD UltraScale and 7-Series device.
    • This IP core provide link layer. Design Gateway provide transport layer and 150MHz GTX physical layer design for 6.0Gbps SATA-III interface as reference design.
    • It can connect with SATA-III HDD directly without external PHY chip.
    Block Diagram -- SATA-IP core - File system management without CPU
  • SATA Verification IP
    • Supports SATA specs 2.5/2.6/3.0/3.1/3.2/3.3/3.4/3.5.
    • Supports 1.5, 3 and 6 Gbps speeds.
    • Supports Port Multiplier Discovery and Enumeration.
    • Supports following interfaces
    Block Diagram -- SATA Verification IP
  • SATA Synthesizable Transactor
    • Supports SATA specs 2.5/2.6/3.0/3.1/3.2/3.3/3.4/3.5.
    • Supports 1.5, 3 and 6 Gbps speeds.
    • Supports Port Multiplier Discovery and Enumeration.
    • Supports TBI interface with following bits
    Block Diagram -- SATA Synthesizable Transactor
  • SATA HOST CONTROLLER IIP
    • Supports SATA specs 2.5/2.6/3.0/3.1/3.2/3.3/3.4/3.5.
    • Fully synthesizable
    • Static synchronous design
    • Positive edge clocking and no internal tri-states
    Block Diagram -- SATA HOST CONTROLLER IIP
  • SATA 3.3 Verification IP
    • Compliant to SATA 3.3, PIPE and AHCI 1.3.1 Specification and backward Compatible to SATA 1.0 ,SATA 2.0 and SATA 3.2 specification.
    • Supports AHCI functionality on Host (HBA) side.
    • Supports complete functionality of Application, Command, Transport, Link and PHY Layer.
    • Configurable PIPE Interface width 8,16 or 32 bits.
    Block Diagram -- SATA 3.3 Verification IP
  • SATA 3 Controller IP
    • Simple AXI streaming TX and RX interface for application layer communication.
    • It supports Native Command Queuing and key primitives/FIS types from SATA specifications.
    • Compliant with Serial ATA 3.0 specification.
    • Supports data rates of 1.5/3/6 Gbit/s.
    Block Diagram -- SATA 3 Controller IP
  • NAND Flash Controller
    • The NFC IP is a NAND Flash Controller for accessing user data from NAND Flash chips.
    • It is designed with scalability in mind and provides standard AXI interface for the ease of integration in SoC design.
    • The NFC has many configurable features to support the requirements for different NAND Flash applications.
    Block Diagram -- NAND Flash Controller
  • LDPC Encoder / Decoder
    • Support 1KB+/2KB+/4KB+ codeword size for one time configuration
    • Support code rate (CR) range 0.93~0.83(down to 0.71)
    • Support configurable throughput, ranges from 300MB/s to 16GB/s
    • Support hard-bit decode (HBD) and up to 6bit soft-bit decode (SBD)
    Block Diagram -- LDPC Encoder / Decoder
×
Semiconductor IP