Wireless IP Cores for SMIC
Welcome to the ultimate Wireless IP Cores for SMIC hub! Explore our vast directory of Wireless IP Cores for SMIC
All offers in
Wireless IP Cores
for SMIC
Filter
Compare
13
Wireless IP Cores
for SMIC
from 6 vendors
(1
-
10)
-
802.15.4 (Zigbee, 6LoWPAN, RF4CE, ISM) PHY
- Fully Integrated 802.15.4 Transceiver
- High Performance
- Low Power Consumption
-
802.11 A/B/G/N Direct Conversion Transceiver
- Fully Integrated 802.11 a/b/g/n Transceiver
- High Performance
- Low Power Consumption
-
UHF RFID tag IC with 3.6kBit EEPROM and -19.5dBm sensitivity
- GF Embedded EEPROM 130 nm
- Read sensitivity -19.5 dBm
- Write sensitivity -17 dBm
- Impedance 20-j300 Ohm @915 MHz
-
UHF RFID tag IC with cryptographic authentication and -15 dBm sensitivity
- SMIC EEPROM CMOS 180 nm
- Passive operation – no battery needed
- Input impedance 14-j580 Ohm
-
SMIC 55nm LL BLE4.2 PHY IP
- Process: SMIC 55nm Low Leakage MS/RF, 1P7M, Ultra Thick Metal (UTM), DNW
- Supply voltage: 1.5V to 3.6V,Operating Temperature: Industrial -40°C to 85°C
- Compliant with the Bluetooth 4.2 Low Energy Single Mode RF Standard.
- Low power consumption: RX: < 4mA @ 3.0V;TX: < 5mA @ 3.0V ;sleep mode: <1uA
-
L1 GPS/Galileo/GLONASS RF Front-end
- SMIC RF CMOS 180 nm technology
- Single conversion superheterodyne receiver
-
GLONASS/GPS/Galileo/BeiDou multisystem single-band 2-channel receiver RFIC
- SMIC CMOS 0.18 um technology
- Simultaneous GPS, Galileo, BeiDou and GLONASS signals reception
- Single conversion superheterodyne receiver
- Optimized for SiP implementation
-
UHF RFID EPC Gen2V2 physical interface
- SMIC 180nm EEPROM technology
- Operating temperature range -40…+85 °C
- Operating frequency 860 - 960 MHz
-
Bluetooth LE v5.3 / IEEE 15.4 RF IP in TSMC 40nm & SMIC 55nm (Silicon proven IP)
- BTLE 5 Compliant with 2Mbps data rate and Long Range support; IEEE 802.15.4 Compliant
- Radio analog hard IP area < 0.5mm2. BTLE & digital soft IP is 150K gates.
- Excellent RX Sensitivity at -97 dBm (Uncoded PHY, 1Mbps), -93.5 dBm (2Mbps)
- Ultra-Low Power Operation (analog hard IP + modem)
-
Digital Baseband IP for GPS/GLONASS Receiver
- Fexible design.
- Scalable number of search engine for different TTFF and sensitivity requirements.
- Scalable number of track module for different number of tracked satellites.