Voltage Reference IP for SMIC

Compare 10 Voltage Reference IP for SMIC from 4 vendors (1 - 10)

Bandgap Voltage / Current Reference SMIC
- Input Voltage Range: PDK VddIO
- Programmable Output Voltage Range
- Untrimmed Accuracy: 5%
- Trimmed Accuracy (single point trim): 0.5%
Power-On-Reset SMIC
- Start-up Time: max 10us
- Configurable Threshold
- Programmable Delay
- Uses Hysteresis to avoid false resets in noisy environments
180nm 5V Bandgap
- 2.5V-5.5V operation.
- 3? 4% untrimmed voltage reference accuracy.
- 2% variation over -40ºC to 125ºC after trimming.
- 70dB low frequency PSRR.
1.19 V Reference voltage source
- SMIC CMOS 0.18 um
- Output voltage 1.2 V
- Temperature-compensated voltage in a wide temperature range
- Low current consumption
1.2 V Bandgap voltage reference
- SMIC CMOS 0.18µm
- Output voltage 1.2 V
- Temperature-compensated voltage in a wide temperature range
- Usage of bipolar pnp transistors
0.6 V Bandgap voltage reference
- SMIC CMOS 0.18µm
- Output voltage 0.6 V
- Temperature-compensated voltage in a wide temperature range
- Low supply voltage systems availability
1.22 V Reference voltage source
- SMIC CMOS 0.18 um
- Output voltage 1.2 V
- Temperature-compensated voltage in a wide temperature range
- Usage of bipolar pnp transistors
612.7 mV Reference voltage source
- SMIC CMOS 0.18 um
- Output voltage 0.6 V
- Temperature-compensated voltage in a wide temperature range
- Low supply voltage systems availability
1.19 V Reference voltage source
- SMIC CMOS 0.18 um
- Output voltage 1.2 V
- Temperature-compensated voltage in a wide temperature range
- Low current consumption
Low-power bandgap - SMIC 0.18um
- Area: 0.078mm2
- Vref (Output reference voltage): 0.7V
- Idd (Current consumption): 8uA
- PSRR (Power supply ripple rejection ratio): 60dB