A/D Converter (ADC) IP for SMIC

Compare 56 A/D Converter (ADC) IP for SMIC from 10 vendors (1 - 10)

7 to 150 MHz digitally controlled oscillator
- SMIC CMOS 180 nm
- Wide oscillation frequency adjustment range (7 MHz…150 MHz)
- No external components required
- Portable to other technologies (upon request)
Auxiliary ADC - 12-bit Successive Approximation Register (SAR) ADC
- Silicon proven in 22, 28, 40, 55, 65, 110, 130, 180nm from SMIC, HHgrace, Global Foundries and Samsung
- Resolution: 12-bit
- Data Rate: 1Msps/200Ksps
- DNL: ±1.5 LSB, INL: ±3 LSB
11 to 25 MHz Band-pass filter
- SMIC CMOS 0.18 um
- Wide cut-off frequency adjustment range (11 MHz…25 MHz)
- Programmable bandwidth
- Narrowband and wideband modes (3 MHz, 5 MHz)
Video ADC - 12-bit Successive Approximation Register (SAR) ADC
- The analog-to-digital converter is a differential high speed low power IP which uses Successive Approximation Register (SAR) architecture to achieve 12-bit resolution.
- The ADC includes a core internal SAR ADC which consists of sample/hold circuits, a capacitive DAC, a comparator and logic control circuits.
- The ADC is designed with high dynamic performance for input signal frequencies up to Nyquist.
- It is perfectly suitable for broadband communication applications.
24-bit Cap-less ADC 106 dB SNR low power and low latency 3 channels
- I2C and APB control interface
- Embedded low noise voltage regulator for best resilience to power supply noise
- Low BoM and capacitor-less input connection
- High dynamic range for high quality recording in far-field applications
Audio CODEC with 100 dB Dynamic Range, 24-bit stereo PWM DAC, six-channel ADC
- WhisperTrigger-d - Ultra-low power always-on voice detection
- Embedded low noise voltage regulator for best resilience to power supply noise
- Automatic Gain Control (AGC)
- Wind Noise Filter (WNF)
SAR ADC
16-Bit 90dB SNR 8~48KHz stereo ADC with FM/MIC inputs, TSMC0.18um
- 16-24bit Data Conversion
- Signal-to-Noise Ratio > 90dB
- Single 1.8V Power Supply for CODEC Core
- Stereo Audio Recording for Microphone or Line-In
CSMC 0.13um 8-Bit 4-Input 200k SAR ADC
- Process: CSMC0.13μm logic process 1Poly 6Metal
- Resolution: 8-bit resolution
- DNL: +/-0.5 LSB, INL: +/-1.0 LSB
- Data Rate: 200KSPS
12 Bit ADC - SMIC 110nm generic
- Supports 1Ksps~3Msps sampling rate; 16CH single-ended/8CH differetial; SNR:64dB @2Msps, THD:-72dB @2Msps;
- Power consumption: 0.7mA @2Msps;