Analog IP for Silterra
Welcome to the ultimate Analog IP for Silterra hub! Explore our vast directory of Analog IP for Silterra
All offers in
Analog IP
for Silterra
Filter
Compare
40
Analog IP
for Silterra
from 8 vendors
(1
-
10)
-
400kHz Touch Sensor - Silterra 0.18 um
- Capacitive sensing oscillator
- 2pF sensibility
- 400kHz output frequency
-
Linear Li-Ion Battery Charger - Programmable charging current up to 1.1A Fast Charge - SilTerra 0.18um
- This USB/AC Li-Ion battery charger is targeted for portable applications.
- The charging current can be adjusted from 60mA up to 1.1A through an external resistor or by digital control.
- The current provided to the system can also be adjusted up to 1.8A through the same procedure.
-
Li-Ion Battery Charger - ±1% Accuracy (4.2V) / Up to 1500mA Fast Charge - Silterra 0.18 um
- This macro-cell is a precision linear Li-Ion battery charger core (4.2V, +/-1%) designed for SilTerra CL180GH5 0.18μm CMOS technology (5V).
- The circuit has internal under/over-voltage, current/temperature protections. It includes a built-in NTC circuit with internal bias resistor for the battery thermistor.
-
General Purpose Fractional-N PLL in GlobalFoundries 22FDX
- Super small: 80 x 80 microns!
- Very low power: 12-mW
- Broad frequency range: 6-GHz
-
General Purpose Temperature Sensor - 2°C accuracy – 10-bit Digital Readout - Globalfoundries 22nm FD-SOI
- CM6217co is a low-power general purpose Temperature Sensor IP featuring 12-bit parallel digital readout (2’s complement 8-bit integer and 4-bit fractional) representing temperature in °C and 2°C accuracy after calibration procedures.
- This IP requires an external clock signal and does not require an external bias voltage/current.
-
Flexible 200kHz-20MHz Oscillator - Customizable frequency, Low Power - TSMC 40nm
- This macro-cell is a flexible general purpose oscillator core designed for TSMC 40nm CRN40LP CMOS technology.
- The customized IP oscillates at a specific frequency selected between 200kHz and 20MHz, and consumes a proportional quiescent current (typ. 1.8μA to 13μA).
-
GP ULP Temperature Sensor - Built-in Sigma-Delta modulator – Low Quiescent Current - Silterra 0.18um
- This macro-cell is an ultra-low-power, general purpose temperature sensor core.
- This IP features a built-in Sigma-Delta modulator that is responsible to convert the analog signals to digital bit stream.
-
6MHz ±1% PVT 1.8V Low Power Oscillator in Silterra 0.18um
- This macro-cell is a low-power, precision, general purpose 1.8V 6MHz ±1% PVT internal oscillator core aimed for clock generation.
- A 7 bit digital bus allows frequency adjustment against process variations.
-
6MHz 3.3V Low Power Oscillator - ±1% after trimming. Re-targetable to 1-30MHz - Silterra 0.18µm
- This macro-cell is a low-power, precision, general purpose 3.3V 6MHz ±1% PVT internal oscillator core aimed for clock generation.
- A 7 bit digital bus allows frequency adjustment against process variations.
-
17nA Current Bias with Enable Low Voltage (1.0V), Ultra Low Power (90nW @ 1.8V)
- This macro-cell is a low power general purpose current bias generator core designed for TowerJazz 0.18µm TS18SL CMOS technology.
- The circuit generates 2 × NMOS 17nA current branches. The current bias is temperature compensated.
