Voltage Reference IP for GLOBALFOUNDRIES
Welcome to the ultimate Voltage Reference IP for GLOBALFOUNDRIES hub! Explore our vast directory of Voltage Reference IP for GLOBALFOUNDRIES
All offers in
Voltage Reference IP
for GLOBALFOUNDRIES
Filter
Compare
13
Voltage Reference IP
for GLOBALFOUNDRIES
from 8 vendors
(1
-
10)
-
Bandgap Voltage Reference 500mV/1.14V High Precision
- The WEA05114BG45G is a high precision band gap reference voltage that provides a 500 mV and a 1.14 V output from inputs between 1.8 V and 3.0 V
- It is a Bipolar style Bandgap based on SOI Forward Biased Diodes
- The SOI Diodes are not tied to the substrate, in this way the circuit simultaneously provides PTAT, CTAT and is constant with temperature currents
- It is specified over the −40°C to +120°C temperature range.
-
Power and Clock Generation IP - GLOBALFOUNDRIES® 22FDX®
- Tightly integrated power management platform with a soft-IP wrapper around Analog / Mixed-Signal hard macros which generate all supply voltages and clock signals needed to run highly efficient SoCs in GlobalFoundries® 22FDX®.
- Running from only one supply voltage and reference clock, the IP generates its own internal supplies and references, and those needed to run the Racyics® ABX® Generator.
-
NFC Power Management Unit (0.6/1.2/1.5 V output voltage, 10/20/50 uA output current, 2 MHz output clock frequency)
- 0.6/1.2/1.5 V output voltage, 10/20/50 uA output current, 2 MHz output clock frequency
- GF 130nm Embedded EEPROM technology process
- Reverse current protection
-
Bandgap voltage reference (output voltage 0.4 V)
- Global Foundries CMOS 55 nm
- Output voltage reference 0.4 V
- Output currents reference 250 nA
- Low current consumption
-
Ultra-Low-Power Bandgap Voltage Reference in GF 22 FDX
- Precision band-gap reference
- 40dB AC PSRR, 50dB DC PSRR
- ±12mV voltage accuracy
- 30ppm/C temperature drift
-
Bandgap Voltage Reference
- 1.5V min Supply, PTAT, CTAT, TI for 50 uA current and 0.4-0.8 Voltage Ref (6-bit DAC), PSRR -40 dB, less than 200 uV RMS output noise
- GlobalFoundries - 45SPCLO
-
Band-gap Reference in GF N65 LP. Multiple voltages referenced to internal and external resistors.
- Band-gap and GM currents
- Currents proportional to 1/Rint and 1/Rext
- 12 of each outputs: 50µA, 20µA and 10µA
- 106 independent current outputs
-
BandGap Reference 1.5V BGR
- 1.5 V BGR
-
1.8V Voltage Regulator (Vcc=3.3/2.5V, Vout=1.8V,Iout=150mA)
- 0.18um CMOS technology
- Very low dropout voltage: 300mV at Iout=100mA
- Output Current: up to 150 mA
- Input Voltage Range: 2.5 – 3.3V