Regulator IP for GLOBALFOUNDRIES

Compare 57 Regulator IP for GLOBALFOUNDRIES from 8 vendors (1 - 10)

CC-100IP-RF Analog and RF Sensitivity Enhancement IP
- Enhances the Sensitivity of Analog and RF Frontend Receivers
- Enhances the PSRR od Analog and RF Frontend Receivers
- Occupies the same on chip area as standard DCAPs with at least a 600X effective capacitance increase
- Up to a 36% Dynamic Power and RF Emissions Reduction
CC-100IP-MB Electric Vehicle Mileage Booster IP
- Extends EV Driving range by 10%
- Extends the driving and Biking Range of Electric Vehicles from 16 to 30 Miles
- Occupies the same on chip area as standard DCAPs with at least a 600X effective capacitance increase
- Up to a 36% Dynamic Power and RF Emissions Reduction
Hyper-Decoupling Capacitor with a Capacitance Multiplication, Series Inductance Nullification, Cybersecurity Enhancement and an Energy Harvesting capabilities
- Occupies the same on chip area as standard DCAPs with at least a 600X effective capacitance increase
- Up to a 36% Dynamic Power and RF Emissions Reduction
- On-Chip Cybersecurity Enhancement
- 25% Reduction in Capacitor ESL
Combined Power On Reset and Brown Out Reset
- A flexible offering enabling to implement only the relevant features
- Ultra low power consumption of 13 μA in normal mode and 5 nA in low power mode enabling to optimize the overall consumption of the Always-On
- Possibility to disable the BOR monitoring during low power mode in order to save power
- High programmability: POR, PON and BOR thresholds are all programmable. BOR allows a dynamic programming to comply with the supply voltage of the power domain
Switching regulator, inductor-based, PWM mode, high efficiency
- High efficiency buck regulator (up to 95% peak), over wide load current range
- Pulse With Modulation (PWM) mode enabling to master the frequency response
Linear Regulator for digital island
- Low dropout: 380mV of dropout at ILOAD= IMAX
- Low Bill-of-Material: optimized in density for the best trade-off for the given output current and input voltage range
- A cost-efficient solution compared to external Power Management
- Behavioral models: ease of integration in SoC and optimization of Power Management Network (PMNet) using models to verify mode transitions as well as noise propagation
Switching regulator, inductor-based, PWM mode, high efficiency
- High efficiency buck regulator (up to 95% peak), over wide load current range
- Pulse With Modulation (PWM) mode enabling to master the frequency response
- Automatic mode change of the Power Stage Unit, maintaining high-efficiency at low load current
- Low Bill-Of-Material: fully integrated feedback and active compensation loop do not require additional external passive components.
IR DROP SMIC
- Active current current: 120uA
- Powered-down current: <1uA
- Detection time: 25nS typ.
- Hysteresis: 20mV typ.
IR DROP GlobalFoundries
- • Active current current: 120uA
- • Powered-down current: <1uA
- • Detection time: 25nS typ.
- • Hysteresis: 20mV typ.
Power-On-Reset GlobalFoundries
- Start-up Time: max 10us
- Configurable Threshold
- Programmable Delay
- Uses Hysteresis to avoid false resets in noisy environments