A/D Converter (ADC) IP for GLOBALFOUNDRIES

Compare 58 A/D Converter (ADC) IP for GLOBALFOUNDRIES from 17 vendors (1 - 10)

16-bit Sigma Delta ADC
- Globalfoundries 130LP
- Silicon proven
- Low power
12-bit High Speed ADC on GF 22FDX
- The WEAADC12BHS22G is a 12-bit Successive Approximation Analog-to-Digital Converter (ADC) that supports both single-ended and differential operation, depending on the input and reference connections.
- It integrates a split-capacitor DAC with a built-in track-and-hold circuit, a dynamic comparator with DC-offset autocalibration, SAR logic state machine, and pre/post-calibration logic. The device also includes gain and offset calibration mechanisms.
12-bit 2GSPS Time Interleaved ADC on GF 22FDX
- The WEAADC12BHSI22G is a 12-bit time interleaved Successive Approximation Analog-to-Digital Converter (ADC) that supports both single-ended and differential operation, depending on the input and reference connections.
- It integrates 13 WEAADC12BHS22G with programmable clock skew (50ps coarse 4ps fine with minimum step 0.25ps) and pre/post-calibration logic on each.
11-bit, 5 GSPS SAR ADC - GlobalFoundries GF22FDX
- The A11B5G is a low-power, high-speed analog to digital converter (ADC) intellectual property (IP) design block.
- It is a hybrid-SAR ADC, with 11-bit resolution and a sampling rate of 5 gigasamples-per-second (GSPS).
12-bit, 10 GSPS ADC - GlobalFoundries GF22FDX
- 12-bit resolution
- 10 GSPS sampling rate
- 6 GHz Input Bandwidth
Auxiliary ADC - 12-bit Successive Approximation Register (SAR) ADC
- Silicon proven in 22, 28, 40, 55, 65, 110, 130, 180nm from SMIC, HHgrace, Global Foundries and Samsung
- Resolution: 12-bit
- Data Rate: 1Msps/200Ksps
- DNL: ±1.5 LSB, INL: ±3 LSB
12-bit Analog-to-Digital Converter
- The agileADC 12 Analog-to-Digital Converter is a traditional Charge-Redistribution SAR ADC that is referenced to VDD, VSS. The architecture can achieve up to 12-bit resolution at sample rates up to 64 MSPS. It includes a 16-channel input multiplexor that can be configured to be buffered or unbuffered, and support differential or single-ended inputs.
12-bit 1-channel up to 1 MSPS low power SAR ADC
- Global Foundries Embedded EEPROM 55nm
- INL ±3LSB
- DNL ±1LSB
- SINAD 65dB@1MSPS
Video ADC - 12-bit Successive Approximation Register (SAR) ADC
- The analog-to-digital converter is a differential high speed low power IP which uses Successive Approximation Register (SAR) architecture to achieve 12-bit resolution.
- The ADC includes a core internal SAR ADC which consists of sample/hold circuits, a capacitive DAC, a comparator and logic control circuits.
- The ADC is designed with high dynamic performance for input signal frequencies up to Nyquist.
- It is perfectly suitable for broadband communication applications.
24-bit Cap-less ADC 107 dB SNR low power and low latency mono channel
- I2C and APB control interface
- High dynamic range for high quality recording in far-field applications
- Programmable ultra low latency capability