Other
All offers in
Other
Filter
Compare
67
Other
from
23
vendors
(1
-
10)
-
15b 4kS/s serial ADC
- Effective Number of Bits: 15b (SNDR=92dB signal-to-noise-and-distortion-ratio) with digital IIR filter post-processing
- Power supply 3.3V, Power Consumption 200µW
- 0.35um CMOS Technology
- Low input sampling capacitor of 4pF
-
Sigma-Delta ADC
- Dynamic Range: 100 dB
- Resolution: High-resolution digital output
- Sigma-Delta Modulation: Advanced noise shaping and low distortion
- Power Consumption: Optimized for low power, typically in the milliwatt range
-
15 Bit 192 kS/s Sigma-Delta ADC on XFAB XH018
- The ADC IP is a general-purpose sigma-delta converter and it is configurable for conversion speed and power consumption with adaptable oversampling ratio.
- It is built using typical second order architecture using correlated-double-sampling method. The target application is sampling of transient input voltages with 8k S/s with low-power and 192 kS/s respectively.
-
15 Bit 8 kS/s Sigma-Delta ADC on XFAB XH018
- Resolution: 15 bit
- Conversion rate: 8 kSps
- Power consumption: 1.3 mW @ 1.8V
-
7 Bit 6 GS/s Folding ADC on Fujitsu 55 nm CS250L
- The IP consists of a 7 bit monolithic folding ADC clocked externally for 6 GS/s.
- The differential input signal of maximum +/- 450 mV is ac-coupled to the input. Lower cut off frequency is well below 500 kHz.
- The ADC is calibrated internally after reset to increase precision. The calibration can be disabled and can also be triggered manually.
-
Dual Channel Digital Capacitive Sensor Interface
- The MVCT018 is a programmable and very accurate capacitance-to-digital converter interface, designed to be easily integrated with capacitive sensors.
- The chip features very fast measurement times, low operating power, and very low standby currents, making it very suitable for low power and portable applications.
-
7 to 150 MHz digitally controlled oscillator
- SMIC CMOS 180 nm
- Wide oscillation frequency adjustment range (7 MHz…150 MHz)
- No external components required
- Portable to other technologies (upon request)
-
Ultra Low Power 8-bit ADC - Ultra Low Voltage (1V), Ultra Low Power (850nA) - LFoundry 0.15µm
- This macro-cell is a general purpose, ultra low power, 8-bit, time-based Analog-to-Digital Converter (ADC) core designed for LFoundry 0.15μm LF150 CMOS technology STD (Standard) and LP (Low Power) process.
- The circuit is ideal for general purpose/auxiliary low frequency measurements (such as power supply voltage monitor) in applications in which ultra low power consumption is mandatory.
-
2-bit 2-channel 50 MSPS flash ADC
- UMC CMOS 180 nm
- Resolution 2-bit
- Adjustment of threshold levels
- Adjustment of dc level of thresholds scale
-
2-bit 2-channel 100 MSPS flash ADC
- UMC CMOS 180 nm technology
- Resolution 2 bit
- Adjustment of threshold levels
- Adjustment of dc level of thresholds scale
