Four soft-core processors for embedded systems
Sven-Ake Andersson, Realtime Embedded
EETimes (1/8/2013 3:23 PM EST)
Since 2000, the folks at Realtime Embedded have concentrated on helping companies develop embedded systems used in advanced products. Their four primary focus areas are FPGA, Linux, virtual hardware, and multicore processing systems. Realtime Embedded is involved in customer and financed research projects, in house and on site, spanning a wide range of industries.
Many of you may have already read my blog called How to design an FPGA from scratch, which I started to write 2006 and which Max Maxfield wrote about in EE Times for the first time in 2007.
My latest blog describes the work I have performed at Realtime Embedded over the course of the past year. In this blog, I investigate four soft-core processors and use the same setup as in my first blog called “learning by doing.” This means that each soft processor will be implemented in an FPGA and the whole design process will be documented.
Many of you may have already read my blog called How to design an FPGA from scratch, which I started to write 2006 and which Max Maxfield wrote about in EE Times for the first time in 2007.
My latest blog describes the work I have performed at Realtime Embedded over the course of the past year. In this blog, I investigate four soft-core processors and use the same setup as in my first blog called “learning by doing.” This means that each soft processor will be implemented in an FPGA and the whole design process will be documented.
To read the full article, click here
Related Semiconductor IP
- Sine Wave Frequency Generator
- CAN XL Verification IP
- Rad-Hard GPIO, ODIO & LVDS in SkyWater 90nm
- 1.22V/1uA Reference voltage and current source
- 1.2V SLVS Transceiver in UMC 110nm
Related White Papers
- Quality Assurance for Embedded Systems
- ACE: Confidential Computing for Embedded RISC-V Systems
- Efficient Hardware-Assisted Heap Memory Safety for Embedded RISC-V Systems
- Android, Linux and Real-Time Development for Embedded Systems
Latest White Papers
- OmniSim: Simulating Hardware with C Speed and RTL Accuracy for High-Level Synthesis Designs
- Balancing Power and Performance With Task Dependencies in Multi-Core Systems
- LLM Inference with Codebook-based Q4X Quantization using the Llama.cpp Framework on RISC-V Vector CPUs
- PCIe 5.0: The universal high-speed interconnect for High Bandwidth and Low Latency Applications Design Challenges & Solutions
- Basilisk: A 34 mm2 End-to-End Open-Source 64-bit Linux-Capable RISC-V SoC in 130nm BiCMOS