Delivering High Quality Analog Video Signals With Optimized Video DACs
Antonio Leal, Analog Design Manager, Synopsys
In most modern consumer equipment, multimedia content is processed in the digital domain. However, analog video transmission requires the digital video content conversion to the analog domain. To accomplish this, a video digital-to-analog (DAC) must be used. This paper outlines the most common analog video signal standard-specifications that multimedia SoCs must support. It describes the key characteristics and features of a DAC solution optimized for video applications. The paper addresses system-level techniques that together with an optimized video DAC will enable SoC designers to deliver power-efficient and feature-rich multimedia devices.
Related Semiconductor IP
- Sine Wave Frequency Generator
- CAN XL Verification IP
- Rad-Hard GPIO, ODIO & LVDS in SkyWater 90nm
- 1.22V/1uA Reference voltage and current source
- 1.2V SLVS Transceiver in UMC 110nm
Related White Papers
- Integrating analog video interface IP into SoCs delivers superb image quality (Part I)
- Integrating analog video interface IP into SoCs delivers superb image quality (Part II)
- Processor Architecture for High Performance Video Decode
- Achieving Optimized DSP Encoding for Video Applications
Latest White Papers
- OmniSim: Simulating Hardware with C Speed and RTL Accuracy for High-Level Synthesis Designs
- Balancing Power and Performance With Task Dependencies in Multi-Core Systems
- LLM Inference with Codebook-based Q4X Quantization using the Llama.cpp Framework on RISC-V Vector CPUs
- PCIe 5.0: The universal high-speed interconnect for High Bandwidth and Low Latency Applications Design Challenges & Solutions
- Basilisk: A 34 mm2 End-to-End Open-Source 64-bit Linux-Capable RISC-V SoC in 130nm BiCMOS