Other for TSMC
Welcome to the ultimate Other for TSMC hub! Explore our vast directory of Other for TSMC
All offers in
Other
for TSMC
Filter
Compare
19
Other
for TSMC
from 7 vendors
(1
-
10)
-
Low-Noise Bandgap Reference - Low Noise: 63nV/√Hz, PSRR: -80dB - TSMC 0.18um CMOS (CLM18)
- This macro-cell is a low noise, high PSRR voltage reference core designed for TSMC 0.18um (CLM18) CMOS technology.
- The core is ideal for applications where noise performance is critical.
- The circuit generates a buffered 1.185V, temperature-compensated bandgap voltage reference (40ppm/°C).
-
Active antenna detector with load current limit
- TSMC 0.18 um SiGe
- Wide range of threshold adjustment
- A load current limit
- Portable to other technologies (upon request)
-
Active antenna detector with load current limit and supply current 140 uA
- TSMC 0.18 um SiGe
- Wide range of threshold adjustment
- A load current limit
- Portable to other technologies (upon request)
-
Process/Voltage/Temperature Sensor (Supply voltage 1.8V/0.9V)
- High accuracy temperature and voltage measurements
- Process detector for all-voltage threshold MOS transistors
- Up to 16 remote temperature/voltage sensors
-
Baseband power amplifier with attenuator
- TSMC 65 nm CRN65LP
- Differential inputs, outputs
- High frequency 2 – 100 MHz
- Available attenuation range from 0 to 60 dB (step by 1 dB)
-
75 MHz to 3 GHz Power amplifier
- TSMC CMOS 65 nm
- A class PA
- Frequency range (75 MHz – 3 GHz)
- High linearity
-
Linear Regulator, Low-noise optimized for sensitive application such as RF or PLL blocks
- Low noise: high power Supply Rejection Ratio (PSRR): - 65 dB at F < 10 kHz
- Low intrinsic noise: 20 uVRMS at 10 Hz to 20 kHz
- Low Bill-of-Material: optimized in density for the best trade-off for the given output current and input voltage range
- Cost efficient solution compared to external Power Management.
-
Retention Alternative Regulator, combines a linear regulator and an ultra-low quiescent regulator for sleep mode
- Ideal regulator for power and voltage islets
- Secured integration in the SoC Embedded RCU (Regulator Control Unit) to manage booting and mode transitions and to ensure data integrity
- Configurable output drive before delivery to fit the application
- Performances in sleep mode: qLR with low quiescent current: 0.2 uA
-
Linear Regulator, ultra low quiescent current for retention mode
- Very low quiescent and leakage for Low-Power
- Retention capability enables optimization of the power consumption depending on the modes and needs of the SoC
- Can supply always-on very low loads
- Low Bill-of-Material: supports external capacitor if required by the system
-
Linear Regulator, ultra low quiescent current for retention mode
- Very low quiescent and leakage for Low-Power
- Retention capability enables optimization of the power consumption depending on the modes and needs of the SoC
- Can supply always-on very low loads
- Low Bill-of-Material: supports external capacitor if required by the system