MIPI DSI Device Controller IP
Filter
Compare
13
IP
from 3 vendors
(1
-
10)
-
MIPI DSI Receiver Controller v1.3
- Compliant with the following MIPI specifications
- DSI Host-side interface supports
- Display Panel Connectivity and video/command processing
-
MIPI DSI-2 Receiver Controller v2.0
- DSI-2 Controllers Support
- • MIPI specification of Display Serial Interface (DSI) v2
- • MIPI specification of D-PHY
- • MIPI specification of C-PHY
-
MIPI DSI-2 Transmit Controller v2.0
- Fully compliant to MIPI standard
- Small footprint
- Code validated with Spyglass
-
MIPI DSI TX Controller
- Compliant with MIPI DSI v1.3.1
- Supports both Command Mode and Video Mode
- Supports bi-directional low-power data transmission (LPDT)
- Cadence Serial Display Interface (SDI), MIPI Display Pixel Interface (DPISM), and Display Compression (DSC) input interface options
-
MIPI DSI-2 Transmit Controller v1.0
- Fully compliant to MIPI standard
- Small footprint
- Code validated with Spyglass
-
MIPI DSI-2 Receiver Controller v1.0
- Compliant with the following MIPI specifications
- DSI Host-side interface supports
- Display Panel Connectivity and video/command processing
-
MIPI DSI Transmit Controller v1.3
- Compliant with the following MIPI specifications
- DSI Host-side (display module) interface supports
- Application Processor Connectivity and video/command processing
- AHB Interface for register configuration and monitoring using programmed IO
-
MIPI CSI DSI Controller - CPHY CSI-2 Transmitter v 2.1, Compatible with MIPI C-PHY v1.2 & DPHY v2.1.
- Fully compliant to MIPI standard
- Small footprint
- Code validated with Spyglass
-
RGB to MIPI DSI Display Interface Bridge
- Supports MIPI DSI and MIPI CSI-2 outputs up to 6 Gbp: 1, 2 or 4 data lanes
- Supports parallel MIPI DPI, CMOS, RAW and RGB interfaces at up to 300 MHz
- Supports CSI-2 compatible video formats (RAW, RGB, and YUV):
- Supports DSI compatible video formats (RGB):
-
One Input to Two Output MIPI DSI Display Splitter Bridge
- Supports MIPI DSI up to 6 Gbps per MIPI D-PHY
- Provides one or two MIPI DSI outputs
- Supports all MIPI DSI data types
- Provides a DCS (Display Command Set) controller to program the display, ROM data used only for DSI in HS or LPDT mode – ROM is programmable by user
