Low-power Wi-Fi IP

Filter

Foundries

TSMC (2)

Nodes

40nm (2)

IP Type

Silicon IP (17)

Compare 17 IP from 6 vendors (1 - 10)

WIFI 2.4G/5G Low Power Wakeup Radio IP
- Dual-band Wi-Fi IP with a low-power wakeup radio, aimed at energy-efficient, always-on connectivity.
Multi-protocol wireless plaform integrating 802.11ax (Wi-Fi 6), Bluetooth 5.4 Dual Mode, 802.15.4 (for Thread, Zigbee and Matter)
- Highly versatile multi-protocol wireless connectivity solutions leveraging the latest and market proven Ceva-Waves integrated hardware IP and software platforms, including Wi-Fi, Bluetooth (Classic and LE), 802.15.4 (for Thread, Zigbee and Matter) and UWB
- Optimized co-existence schemes for each specific configuration
- Pre-integrated radio solutions, including RF from Ceva and various partners addressing a wide range of configurations and foundry process nodes
- Easily adaptable to other RF implementations including customer’s own in-house developments
Wi-Fi 802.11 ax/Wi-Fi 6 /Bluetooth LE v5.4/15.4-2.4GHz RF Transceiver IP for IOT Application in TSMC22 ULL
- Metal Layer- 1P7M, 4X1Z1U
- BW support for 20/ 40MHz
- Supports 256 QAM (quadrature amplitude modulation)
- Max Tx output power: +20dBm
Dual band WiFi N/G/B/A Digital Baseband IP
- Supports data rates upto 65Mbps
- Throughput numbers of above 50 Mbps for UDP and above 40 Mbps for TCP.
- Support for authentication methods (Cisco® LEAP, PEAP with EAP-GTC support, CCKM with EAP-FAST) depend on the host platform.
- Supports MAC enhancements including:802.11d -Regulatory domain operation,802.11e -QoSincluding WMM,802.11h –Transmit power control dynamic and frequency selection,802.11i -Security including WPA2 and WAPI compliance,802.11k -Radio resource measurement,802.11r –Roaming,802.11w -Management frame protection
IEEE 802.11ah Wi-Fi HaLow RF Transceiver
- IEEE 802.11ah Wi-Fi HaLow compliant
- Support worldwide sub-1GHz unlicensed ISM bands
- Patented Wireless RF™ digital radio technology
- Integrated LNA, PA, T/R switch, ADC/DAC and matching network
SDIO Card Device IP
- The SDIO Card Device IP core is used to implement SDIO cards that are connected to a Host processor over a standard SD bus. The flexible architecture of the SDIO Device IP core is targeted to develop a range of portable, low-power cards such as the WiFi (802.11), GPS, WiMAX, UWB, LTE.
- The SDIO Card Device IP core is fully compliant with the SD Specification Part E1 SDIO 3.0. It supports SPI, SD1, and SD4 bit transfer modes, and multiple functions per card. High-speed and full-speed SD data transfers are also supported.
40nm 1.1V 6.0GHz-9.4GHz Fractional-N RF PLL
- TSMC 40nm CMOS
- 6.0GHz-to-9.7GHz Buffered VCO PLL Output Coverage
- Scalable Power Consumption
40nm 1.1V 2GHz-4.7GHz Fractional-N RF Quadrature PLL
- 2.0GHz-to-4.7GHz PLL Output Coverage
- Scalable Power Consumption
IEEE 802.11n RF/Baseband/MAC 40nm
- Supports WFA Wi-Fi Direct, Wi-Fi Aware PMF and WPS
- Frequency band: 2.4GHz
- Modulation modes: OFDM with BPSK, QPSK, 16-QAM,64-QAM, DSSS, CCK
- Supported data rates: IEEE 802.11b: 1 to 11Mbps, IEEE 802.11g: 6 to 54Mbps, IEEE 802.11n: 6.5 to 72.2Mbps
40nm 1.8V Programmable 1.1V LDO Regulator with 50mA max. output
- Programmable 0.9V to 1.275V output voltage in 25mV steps
- 2% LDO output variation across process, supply and temperature
- Low-Power Sleep Mode (usable when reference TRV701TSM40LP Band-Gap is disabled)
- 50uA quiescent current