GF 22FDX IP
Filter
Compare
31
IP
from 8 vendors
(1
-
10)
-
GF 22FDX combo voltage regulator combining a high efficiency DC-DC for operation in normal mode and an ultra-low quiescent uLDO to supply AON domain during sleep mode
- Perfect fit for battery-powered IoT applications that require both high-efficiency during active mode and ultra-low power consumption in AON domain during sleep and deep sleep mode
- Support of input voltage from 1.9 V to 5.5 V (Li-Ion, USB supplies)
- Embedded RCU (Regulator Control Unit) to manage booting and mode transitions and to ensure data integrity
- Configurable output current to fit the application
-
DC/DC buck converter in GF 22FDX with low quiescent current and high efficiency at light load
- Low quiescent current to ensure minimum current consumption in deep sleep mode.
- High efficiency at light load to extend battery lifetime (74% @ 10 uA)
- Low ripple value to supply noise sensitive and RF loads
- 1 uH inductor
-
DC/DC Buck Converter in GF 22FDX
- Supply active & AON domains from a single converter​
- Extend battery lifetime:​
- - during SoC active mode: high power efficiency​
- - during SoC standby mode: low quiescent current​​
-
DC/DC Buck Converter in GF 22FDX
- Supply active & AON domains from a single converter​
- Extend battery lifetime:​
- - during SoC active mode: high power efficiency​
- - during SoC standby mode: low quiescent current​​
-
Capless low input voltage LDO in GF 22FDX
- GlobalFoundries 22FDX
- Low silicon area
- Low BoM cost, no output capacitor required
-
Nano power DC-DC converter in GF 22FDX with ultra-low quiescent current and high efficiency at light load
- Ultra-low quiescent current (300 nA) to ensure minimum current consumption in deep sleep / hibernation mode
-
PCIe 2.0 PHY, GF 22FDX x2, North/South (vertical) poly orientation
- Compliant with the PCI Express (PCIe®) 2.1 and PIPE specifications
- x1, x2, x4, x8, x16 lane configurations with bifurcation
- PCIe L1 substate power management
- Supports power gating and power island
-
GF 22FDX 1.8V/3.3V SD/eMMC PHY AG2 Platform
- Compliant with eMMC 5.1 HS400, SD 6.0 SDR104, DDR50, JESD8-7a (1.2V/1.8V) and JESD8c.01 (3.3V)
- Fully integrated hard macro with high speed IOs and DLL/delay lines
- Fine resolution DLL/delay lines for HS400 strobe and HS200/SDR104 auto-tuning
- Easy to integrate with the highly optimized Synopsys SD/eMMC Host Controller IP, providing a complete low risk solution
-
LPDDR4 multiPHY V2 - GF 22FDX
- Supports JEDEC standard LPDDR4X, LPDDR4, LPDDR3, DDR4, DDR3, and DDR3L (1.35V DDR3) SDRAMs
- Support for data rates up to 4,267 Mbps (process dependent)
- Designed for rapid integration with Synopsys Enhanced Universal DDR Memory/Protocol Controllers (uMCTL2/uPCTL2) for a complete DDR interface solution
- PHY independent, firmware-based training using an embedded calibration processor
