Analog IP for VIS
Welcome to the ultimate Analog IP for VIS hub! Explore our vast directory of Analog IP for VIS
All offers in
Analog IP
for VIS
Filter
Compare
4
Analog IP
for VIS
from 1 vendors
(1
-
4)
-
TSMC 180nm 5V Bandgap
- 2.5V-5.5V operation.
- 3σ 4% untrimmed voltage reference accuracy.
- 2% variation over -40ºC to 125ºC after trimming.
- 70dB low frequency PSRR.
- Trimmed, temperature compensated, 10µA reference current outputs with 3% accuracy.
- Trimmed IPTAT output currents can be provided.
- Less than 8µV noise from 0.1Hz to 10KHz.
-
General Purpose PLL for VIS 150nm
- Wide range N, M, P integer dividers.
- 40MHz – 600MHz output frequency range.
- Comparable frequency range 8MHz – 50MHz.
- 18pS RMS cycle to cycle jitter at 600MHz.
- Lock-detect function.
- Bypass function.
-
5MHz-35MHz Low Power Crystal Oscillator - TSMC 0.18µ
- 4MHz-35MHz Frequency range.
- No external bias or limit resistors required.
- Current optimization for best power at frequency.
- Amplitude control loop.
- The OSCI pad input can be used as a CMOS input for test.
- Uses single 1.8V supply.
- Enable/power down provision.
-
VIS 150nm 5V Bandgap voltage reference
- 2.5V-5.5V operation.
- 3σ 4% untrimmed voltage reference accuracy.
- 2% variation over -40ºC to 125ºC after trimming.
- 70dB low frequency PSRR.
- Trimmed, temperature compensated, 10µA reference current outputs with 3% accuracy.
- Trimmed IPTAT output currents can be provided.
