Power Management IP for UMC

Compare 188 Power Management IP for UMC from 7 vendors (1 - 10)

UMC 55nm ULP Bandgap / Current Reference
- 3σ 4% untrimmed voltage reference accuracy.
- 1% variation over -40ºC to 125ºC after trimming.
- 70dB low frequency PSRR.
- Trimmed, temperature compensated, 10µA reference current outputs with 3% accuracy.
- Trimmed IPTAT output currents can be provided.
- Less than 8µV noise from 0.1Hz to 10KHz.
2.0-3.6V to 1.0-1.4V step down DC/DC converter
- UMC 55nm eFlash CMOS technology
- Input Voltage Range: +2.0V to +3.6V
- Current limit detector
Power Management Unit
- UMC 55nm eFlash CMOS technology
- Input Voltage Range: +2.0V to +3.6V
- Four Low Dropout Regulators with output voltage set up
- Output current adjustment
CC-100IP-MB Electric Vehicle Mileage Booster IP
- Extends EV Driving range by 10%
- Extends the driving and Biking Range of Electric Vehicles from 16 to 30 Miles
- Occupies the same on chip area as standard DCAPs with at least a 600X effective capacitance increase
- Up to a 36% Dynamic Power and RF Emissions Reduction
Power-On-Reset IP
- Area: 0.0106mm2 (49um * 216um)
- Low power: 21uA current consumption
- 1.8V supply for analog and 0.75V supply for digital
- Built-in low power bandgap reference
Ultra low power Voltage regulator - UMC 0.13um
- Area: 0.085mm2
- Vin (Input voltage): 3.3V
- Vout (Output voltage): 1.2V
- Imax (Maximum load current): 1mA
Bandgap reference - UMC 0.5um
- Area: 0.169mm2
- Vref (Output reference voltage): 1.25V
- Idd (Current consumption): 50uA
- PSRR (Power supply ripple rejection ratio): 80dB
Low-power bandgap - UMC 0.18um
- Area: 0.1mm2
- Vref (Output reference voltage): 0.7V
- Idd (Current consumption): 10uA
- PSRR (Power supply ripple rejection ratio): 40dB
Low-Power Bandgap Reference Circuit - UMC 0.09um
- Area: 0.108mm2
- Vref (Output reference voltage): 0.7V
- Idd (Current consumption): 10uA
- PSRR (Power supply ripple rejection ratio): 40dB
UMC 0.18um 5v-3.3v Power Regulator
- Process: UMC 0.18um 3.3v/1.8v 1P6M Logic Process
- Input voltage: 3.3v~5.5v
- Output voltage: 3.3v%+/-5%
- Maximum output current: IV33max =250mA