DLL IP for UMC
Welcome to the ultimate DLL IP for UMC hub! Explore our vast directory of DLL IP for UMC
All offers in
DLL IP
for UMC
Filter
Compare
186
DLL IP
for UMC
from 3 vendors
(1
-
10)
-
Low Voltage, Low Power Fractional-N PLLs
- Low power, suitable for IoT applications
- Good jitter, suitable for clocking digital logic.
- Extremely small die area (< 0.005 sq mm), using a ring oscillator
- Output frequency can be from 1 to 400 times the input reference, up to 1.5GHz
-
General Purpose Fractional-N PLLs
- Low power, suitable for logic clocking applications
- Extremely small die area, using a ring oscillator
- Twelve bits fractional resolution
-
High Performance Fractional-N RF Frequency Synthesizer PLLs for 5G, WiFi, etc
- Fractional-N digital PLL architecture, using an LC-tank oscillator
-
High Performance Fractional-N RF Frequency Synthesizer PLL in UMC 40LP
- Fractional-N digital PLL architecture, using an LC-tank oscillator
- Ultra-low jitter and ultra-low phase noise
-
4-GHz Jitter-optimized low-power digital PLL
- - Jitter below 10-ps
- - Super small: 90 x 90 microns!
- - Very low power: 15-mW
- - Broad frequency range: 4-GHz
-
Minimum-area low-power clocking PLL (1st gen)
- - Super small: 80 x 80 microns!
- - Very low power: 12-mW
- - Broad frequency range: 2-GHz
- - Fast lock
-
UMC L28HPC+LVT 28nm DDR DLL - 195MHz-975MHz
- Designed for high-speed DDR style interface applications.
- Generates precise delays that can be programmed from 0 to 360 degrees of the reference period.
- Delays multiple periodic or aperiodic signals independent of voltage and temperature.
- Delivers optimal jitter performance over a wide frequency range.
-
UMC L28HPC+LVT 28nm DDR DLL - 260MHz-1300MHz
- Designed for high-speed DDR style interface applications.
- Generates precise delays that can be programmed from 0 to 360 degrees of the reference period.
- Delays multiple periodic or aperiodic signals independent of voltage and temperature.
- Delivers optimal jitter performance over a wide frequency range.
-
UMC L28HPC+LVT 28nm DDR DLL - 411MHz-2055MHz
- Designed for high-speed DDR style interface applications.
- Generates precise delays that can be programmed from 0 to 360 degrees of the reference period.
- Delays multiple periodic or aperiodic signals independent of voltage and temperature.
- Delivers optimal jitter performance over a wide frequency range.
-
UMC L28HPC+ 28nm DDR DLL - 165MHz-825MHz
- Designed for high-speed DDR style interface applications.
- Generates precise delays that can be programmed from 0 to 360 degrees of the reference period.
- Delays multiple periodic or aperiodic signals independent of voltage and temperature.
- Delivers optimal jitter performance over a wide frequency range.