Voltage Regulator IP for TSMC
Welcome to the ultimate Voltage Regulator IP for TSMC hub! Explore our vast directory of Voltage Regulator IP for TSMC
All offers in
Voltage Regulator IP
for TSMC
Filter
Compare
100
Voltage Regulator IP
for TSMC
from 8 vendors
(1
-
10)
-
LDO Voltage Regulator, Adjustable 0.45 V to 0.9 V Output, 30 mA, TSMC N3P
- The LDO IP is a 1.2V low-quiescent-current adjustable output voltage Low-Drop-Out (LDO) Linear Regulator implemented in the TSMC 3nm N3P CMOS process technology.
- Its low sleep current, 30 mA maximum current, output voltage adjustability and precision make it especially suitable for use as an integrated voltage regulation source for subsystems implemented in analog, digital, mixed-signal and RF ASICs and SoCs.
-
LDO Voltage Regulator, 250 mA, TSMC N3P
- TSMC 3nm FinFET process
- Input voltage: 1.2 V
- Output voltage range: 0.45 V to 0.9 V
- Vout adjustable in 50 mV increments
-
40 mA LDO voltage regulator (3.3/5.0V to 1.8V)
- TSMC 180nm technology
- 1.8V output voltage
- Output voltage trimming
- Maximum output load 40mA
-
Low Dropout Linear Regulator - TSMC 0.18µ
- Input voltage range 3.0V – 5.5V.
- Output voltage 1.8V ±5%.
- Output fold back short circuit protection.
- Over-temperature protection.
- Works with straight-through IO pads.
- External 4.7µF decoupling capacitor.
-
75mA Core Voltage Regulator
- Input voltage range 3.0V – 3.3V.
- Output voltage 1.2V or 1.8V ±4%.
- Output short circuit protection.
- Bundled with Obsidian 1.2V bandgap reference.
- Power down/enable input.
- Fast response to current steps.
-
LDO voltage regulator
- TSMC BiCMOS SiGe 180 nm
- Low drop out
- Low current consumption
- Output voltage digital adjustment
-
5 mA LDO voltage regulator (output voltage 1.1V/1.2V/1.3V/1.4V)
- TSMC CMOS 55nm
- High precision stabilization voltage
- Wide input voltage range from 2.25V to 3.6V
- Output voltage value: 1.1V, 1.2V, 1.3V, 1.4V
-
Power management unit (0.9V, 1.8V, 3.3V output voltages, 1.2V reference voltage and 10uA/1uA reference currents)
- TSMC 28nm eFlash technology
- Bandgap output voltage 1.2V
- Bandgap output voltage accuracy without trimming ±3% @5.0V
-
10 mA LDO voltage regulator (output voltage 1.1V/1.2V/1.3V/1.4V)
- TSMC CMOS 55nm
- High precision stabilization voltage
- Wide input voltage range from 2.25V to 3.6V
-
1 mA LDO voltage regulator (output voltage 0.4V…0.9V)
- TSMC CMOS 40 nm
- High precision stabilization voltage
- Wide input voltage range from 1.62V to 3.63V
