Regulator IP for TSMC
Welcome to the ultimate Regulator IP for TSMC hub! Explore our vast directory of Regulator IP for TSMC
All offers in
Regulator IP
for TSMC
Filter
Compare
87
Regulator IP
for TSMC
from 4 vendors
(1
-
10)
-
50mA CMOS buck regulator - TSMC 0.18µ
- Input voltage range 3.0V – 5.5V.
- Output voltage 1.8V ±5%.
- 89% efficiency at 50mA.
-
LDO voltage regulator
- TSMC BiCMOS SiGe 180 nm
- Low drop out
- Low current consumption
- Output voltage digital adjustment
-
5 mA LDO voltage regulator (output voltage 1.1V/1.2V/1.3V/1.4V)
- TSMC CMOS 55nm
- High precision stabilization voltage
- Wide input voltage range from 2.25V to 3.6V
- Output voltage value: 1.1V, 1.2V, 1.3V, 1.4V
-
10 mA LDO voltage regulator (output voltage 1.8 V)
- TSMC BiCMOS SiGe 180 nm
- Low drop out
- Low current consumption
- Portable to other technologies (upon request)
-
Retention Alternative Regulator, combines high efficiency in normal mode and ultra-low quiescent current for sleep mode
- - Single input voltage supporting 1.62 V to 3.63 V
- - Junction temperature range from -40°C to 125°C
- - Manages booting and transitions between embedded regulators
- - Enables high power and low power operating modes
-
Linear Low-Dropout Regulator (Output Voltage 0.6V)
- Output Voltage 0.6V
- TSMC12/16nm CMOS FinFET
-
Over-voltage Protection Module to handle up to 5.5 V using standard process 3.3 V devices - High temperature (Grade 1, Tj=150°)
- Over-voltage protection biasing for embedded regulators
- Avoids expensive solutions while enabling direct battery connection.
- Built-in over-voltage protection (up to 5.5 V) using 3.3 V transistors
- Low-leakage for SoC retention mode
-
Over-voltage Protection Module to handle Over-voltage operation (up to 5.5 V) while using standard process 3.3 V devices
- Over-voltage protection biasing for embedded regulators
- Avoids expensive solutions while enabling direct battery connection.
- Built-in over-voltage protection (up to 5.5 V) using 3.3 V transistors
- Low-leakage for SoC retention mode
-
Linear Regulator, Fast load transient respons voltage regulator optimized for sensitive application such as RF blocks
- Fast load transient response
- Output voltage drop is less than 10 mV for a 16 to 65 mA load current step change in 50 ns
- Voltage settles withing 2 mV of final voltage in less than 10 us under the same conditions
- Low Bill-of-Material
-
Over-voltage Protection Module to handle Over-voltage operation (up to 5.5 V) while using standard process 3.3 V devices
- Over-voltage protection biasing for embedded regulators
- Avoids expensive solutions while enabling direct baterry connection.
- Built-in over-voltage protection (up to 5.5 V) using 3.3 V transistors
- Over-voltage power range: 1.9 V to 5.5 V