DC-DC Converter IP for SMIC
Welcome to the ultimate DC-DC Converter IP for SMIC hub! Explore our vast directory of DC-DC Converter IP for SMIC
All offers in
DC-DC Converter IP
for SMIC
Filter
Compare
10
DC-DC Converter IP
for SMIC
from 2 vendors
(1
-
10)
-
Ultra low power DCDC
- PWM mode and PSM mode control
- 2A maximum output current
- Dynamic output voltage scaling
- Spread-spectrum frequency modulation
-
SMIC 0.13µm 5V-3.3V 350mA Synchronous Buck DC-DC
- Process: SMIC 0.13μm 3.3V/1.2V 1P6/7/8M Logic Process
- Efficiency: 90% when IOUT=350mA; 80% when IOUT=2.5mA (VIN=5V)
- Input Voltage: 4.0~5.5V
- Output Voltage: 3.3V±5%
-
SMIC 0.18um PWM Boost DC/DC Controller
- Process: SMIC0.18 MIM M5
- Operating temperature range: -40~125°C
- Input voltage range: 0.95v ~ 1.8v
- Switching frequency: 1MHz
-
SMIC 0.13um 3.3V-1.8V 360mA Synchronous Buck DC-DC
- Process: SMIC 0.13μm 3.3V/1.2V 1P6/7/8M Logic Process
- Efficiency: up to 85% when VIN=3.3V, IOUT=360mA
- Input Voltage: 2.7~3.6V
- Output Voltage: 1.8V±5%
-
DCDC - SMIC 110nm generic
- Quiescent current is low to30uA(exclude BGP)
- Ultra-low shutdown leakage:100nA
- Low output ripple: <25mV
- 200mA peak output Current(Vin>=3.0V)
-
DCDC - SMIC 130nm Eflash low power
- Low to 5mV ripple;
- 400mA maximum current ability; Internal OC/UV/OV protection; Typical output: 1.5V; Output range: 1.2V~1.9V
-
DCDC - SMIC 55nm Eflash
- low to 5mV ripple; Ultra high speed response;
- 400mA maximum current ability; Internal OC/UV/OV protection;
- Typical output: 1.2V; Output range: 0.9V~1.5V;
- Suitable for RF application
-
DCDC - SMIC 55nm Eflash
- 2.70V~3.63V input range, 2.5V output voltage; 60mA driving ability;
-
DCDC - SMIC 55nm Eflash
- Low to 15uA quiescent current; PWM and PFM model;
- Output 2.25V/2.5V/2.75V/3.0V/3.3V voltage; maximum 300mA driving ability;5V MOS only
-
DCDC - SMIC 55nm Eflash
- Low to 15uA quiescent current; PWM and PFM model;
- Output range:0.9V~2.0V; typical output voltage: 0.9V/1.0V/1.2V ; 250mA driving ability; 5V MOS only