Other for SMIC
Welcome to the ultimate Other for SMIC hub! Explore our vast directory of Other for SMIC
All offers in
Other
for SMIC
Filter
Compare
101
Other
for SMIC
from 5 vendors
(1
-
10)
-
PLL system, 2.8 to 3.3 GHz
- SMIC CMOS 0.18 um technology
- Wide frequency range (2.8…3.3 GHz)
- Built-in switched capacitors sections for VCO frequency adjustment
- Low noise figure
-
Multiplexer - amplifier
- SMIC CMOS 0.18 um
- Input and output matching 50 Ohm
- No external matching components required
- Built-in adjustment of matching
-
1.19 V Reference voltage source
- SMIC CMOS 0.18 um
- Output voltage 1.2 V
- Temperature-compensated voltage in a wide temperature range
- Low current consumption
-
7 to 20 MHz Intermediate frequency amplifier
- SMIC CMOS 180 nm technology
- Wide gain range (0…62 dB)
- Low input noise figure
- Low group delay time ripple vs. frequency and gain
-
95 dB of SNR, 24-bit audio CODEC with headphone output and line-out
- Robust architecture enabling to maintain the audio performance after integration thanks to the patented PLL-less solution
- Pop-Up Noise Reduction system
- High audio performances measurable with test equipment not specific to audio measurement
- Optimal sound recording performances thanks to the Automatic Gain Control
-
Up to 105 dB of SNR, 24-bit stereo CODEC with PDM to PWM transmodulator DAC and embedded regulaor
- Wind Noise filter to reduce noise during recording in an vehicle
- Pop-Up Noise Reduction System with predictable level and zero-crossing gain transition
- Embedded regulator (nLR) which provide the best resilience to noise on power lines
- Self adaptive recording of sound level with Automatic Gain Control (AGC)
-
0 to 62 dB intermediate frequency amplifier
- SMIC CMOS 180 nm technology
- Wide gain range (0…62 dB)
- Low input noise figure
- Low group delay time ripple vs. frequency and gain
-
GLONASS/GPS/Galileo/BeiDou multisystem single-band 2-channel receiver RFIC
- SMIC CMOS 0.18 um technology
- Simultaneous GPS, Galileo, BeiDou and GLONASS signals reception
- Single conversion superheterodyne receiver
- Optimized for SiP implementation
-
95 dB of SNR, 24-bit audio CODEC with headphone output and line-out
- Robust architecture enabling to maintain the audio performance after integration thanks to the patented PLL-less solution
- Pop-Up Noise Reduction system
- High audio performances measurable with test equipment not specific to audio measurement
- Optimal sound recording performances thanks to the Automatic Gain Control
-
Power on Reset 1.2V
- SMIC 55nm LL technology
- Noise protected
- Low current consumption (~1uA)
