Power Management IP for Samsung
Welcome to the ultimate Power Management IP for Samsung hub! Explore our vast directory of Power Management IP for Samsung
All offers in
Power Management IP
for Samsung
Filter
Compare
12
Power Management IP
for Samsung
from 5 vendors
(1
-
10)
-
30mA 2-channel LDO voltage regulator (output voltage each channel 1.0V)
- Samsung 28nm FD-SOI
- 1.8V analog input voltage
- 1.0V digital input voltage
-
3.3V to 1.0V, 3.0A Step-down DC-DC converter
- Supply voltage: 3.3V analog and 1.0V digital
- Adjustable output voltage with trimming: 0.8V÷1.15V (1.0V typical)
- Maximum output current up to 3A
-
3.3V to 1.8V, 0.7A Step-down DC-DC converter
- Supply voltage: 3.3V analog and 1.0V digital
- Adjustable output voltage with trimming: 1.75V÷2.05V (1.8V typical)
- Output current 0.7A
- Soft start mode
-
Low Power BandGap
- The agileREF_LP consists of: A bandgap reference core; A bandgap reference voltage generator (VREF) (Reference current outputs allow for remote reconstruction of an accurate reference voltage.) Bias current generators (IBIAS) (Temperature independent bias current generators)
-
Scalable, On-Die Voltage Regulation
- Droop and DFS/DVFS response profile
- Programmable droop and DFS/DVFS response rate
-
Low-power capacitor-less LDO designed in Samsung Foundries LF6RLP process
- Low BoM, no external capacitor required
- Low shutdown current to ensure low power power consumption in sleep mode when the LDO is turned off
- Three modes : operation, IDLE and STOP1 to enable various power modes at SoC-level
-
Low-power capacitor-less LDO with embedded voltage reference designed in Samsung Foundries LF6RLP process
- Low BoM, no external capacitor required
- Low shutdown current (40 nA) to ensure low power power consumption in sleep mode when the LDO is turned off
- Three modes : operation, IDLE and STOP1 to enable various power modes at SoC-level
-
Low-voltage detector designed in Samsung Foundries 65nm LFR6LP process node
- Low-voltage monitoring solution for power-critical IoT applications (250 nA operating current)
- Embedded level shifters with isolation capabilities
-
Power-On-Reset IP
- Area: 0.0106mm2 (49um * 216um)
- Low power: 21uA current consumption
- 1.8V supply for analog and 0.75V supply for digital
- Built-in low power bandgap reference
-
Ultra-low quiescent capacitor-less LDO voltage regulator in Samsung Foundries 65nm LFR6LP
- Ultra-low quiescent current to enable very low power consumption in sleep and deep sleep mode
- Low BoM, no external capacitor required
- Embedded voltage reference