Clocking IP for Samsung
Welcome to the ultimate Clocking IP for Samsung hub! Explore our vast directory of Clocking IP for Samsung
All offers in
Clocking IP
for Samsung
Filter
Compare
14
Clocking IP
for Samsung
from 5 vendors
(1
-
10)
-
High Performance Fractional-N RF Frequency Synthesizer PLLs for 5G, WiFi, etc
- Fractional-N digital PLL architecture, using an LC-tank oscillator
-
Low Voltage, Low Power Fractional-N PLLs
- Low power, suitable for IoT applications
- Good jitter, suitable for clocking digital logic.
- Extremely small die area (< 0.005 sq mm), using a ring oscillator
- Output frequency can be from 1 to 400 times the input reference, up to 1.5GHz
-
General Purpose Fractional-N PLLs
- Low power, suitable for logic clocking applications
- Extremely small die area, using a ring oscillator
- Twelve bits fractional resolution
-
High Performance Fractional-N RF Frequency Synthesizer PLL in Samsung 14LPP for 5G, WiFi, etc
- Ultra-low jitter, less than 300fs RMS integrated between 12kHz to 20MHz.
- Suitable for many RF applications, including LO, clocks for, ADC, DAC, high-speed PHY
- Small die area (< 0.05 sq mm), using a LC tank oscillator
- Output frequency can be from 1 to 2047 times the input reference, up to 8GHz
-
Fractional-N PLLs for Performance Computing
- Low jitter, suitable for many clocking applications, including high speed digital, ADC, DAC, medium-speed PHY
- Extremely small die area (< 0.005 sq mm), using a ring oscillator
- Output frequency can be from 1 to 400 times the input reference, up to 4GHz
- Reference clock from 10MHz to 500MHz
-
Fractional-N PLL for Performance Computing in Samsung 14LPP
- Low jitter, suitable for many clocking applications, including high speed digital, ADC, DAC, medium-speed PHY
- Extremely small die area (< 0.004 sq mm), using a ring oscillator
- Output frequency can be from 1 to 400 times the input reference, up to 4GHz
- Reference clock from 10MHz to 500MHz
-
Fractional-N PLL for Performance Computing in Samsung 8LPP
- Low jitter, suitable for many clocking applications, including high speed digital, ADC, DAC, medium-speed PHY
- Extremely small die area (< 0.003 sq mm), using a ring oscillator
- Output frequency can be from 1 to 400 times the input reference, up to 4GHz
- Reference clock from 10MHz to 500MHz
-
High Speed PLL
- Silicon proven in 22, 28, 40, 55, 65, 110, 130, 180nm from SMIC, HHgrace, GlobalFoundries and Samsung.
- Support integer mode, Fraction mode and Spread-Spectrum mode
- Input reference range:10MHz~100MHz
- Core Area:0.0678 mm^2
-
Integrated Droop Response System
- Observable
- Tightly Coupled
- Process Portable
-
Aeonic Generate Clock Generation Module [PLL], 8x smaller than fractional analog solutions
- Process portable
- Proven (65nm to 3nm)
- Full SCAN testable
- Core voltage supply