Other
All offers in
Other
Filter
Compare
41
Other
from 15 vendors
(1
-
10)
-
BCH Encoder/Decoder IP Core
- Full hardware implementationfor maximum performance, encoding, errordetectionand correct
- Balanced performance/gatecount
- All Galois fields covered
- ValidatedIP reducesTime-To-Market
-
DVB-S2X Wideband BCH and LDPC Decoder
- Compliant with DVB-S2 and DVB-S2X
- Support for decoding of BBFRAMEs
- Support for ACM, CCM, and VCM
-
NCR Processor
- Configurable PI Controller to compensate for frequency drifts
- Synchronous output clock with external 1PPS input
- Easy integration with Creonic components
-
DVB-RCS2 Multi-Carrier Receiver
- Compliant with ETSI EN 301 545-2 (DVB-RCS2)
- Support for Linear Modulation Bursts of Table A-1
- Optional support for Spread-spectrum Linear Modulation Burst waveforms of Table A-2
- Support for BPSK, QPSK, 8-PSK, 16-QAM
-
DVB-GSE Encapsulator and Decapsulator
- Compliant with ETSI TS 102 606-1 V1.2.1 (Annex D, DVB-GSE Lite)
- Support for multi-protocol encapsulation (IPv4, IPv6, MPEG, Ethernet, etc.)
-
DOCSIS 3.1 LDPC Decoder (PLC / NCP / Data)
- Soft-Decision Demapper, Derandomizer, Deinterleaver, Depuncturer, and LDPC Decoder are included
- Support for 4k and 8K FFT sizes
- Support for 16-QAM modulation
-
DVB-S2X Wideband Modulator
- Compliant with DVB-S2 and DVB-S2X
- Supports ACM, CCM, and VCM modes
- Support for short and normal frames (16,200 bits and 64,800 bits)
- Support for QPSK to 256-APSK, VLSNR modes on request
-
DVB-S2X Wideband Demodulator
- Compliant with ETSI EN 302 307-1 V1.4.1 (2014-11) (DVB-S2) and ETSI EN 302 307-2 V1.1.1 (2014-10) (DVB-S2X).
- Supports CCM, ACM and VCM modes
- Support for QPSK up to 256-APSK
- Support for short blocks (16200 bits) and long blocks (64800 bits)
-
DVB-S2X LDPC/BCH Decoder
- Compliant with DVB-S2 and DVB-S2X
- Support for decoding of BBFRAMEs
- Support for ACM, CCM, and VCM
- Support for very low SNR modes (VLSNR) with SNRs below -9 dB
-
DVB-RCS2 Modulator
- Compliant with DVB-RCS2
- Support for Pi/2-BPSK, QPSK, 8-PSK, and 16-QAM
- Support for all linear burst modulation waveforms specified in Annex A
- Output baseband-filtered and gain adjusted samples