GF L013LP 130nm Spread Spectrum PLL - 90MHz-450MHz
Overview
The Spread Spectrum PLL is designed to multiply an input clock by a fixed-point number between 92 and 184 with frequency spreading capability suitable for PC and consumer electronics applications that require low EMI. It does not provide any deskew functionality. It contains a 1-64 divider at the reference clock input, a 1-256 or larger integer divider and a 1-256 or larger fractional divider in the internal feedback path, with as many as 4 bits of precise fractional-N control, and a 1-8 divider at the output. It can generate precise and adjustable frequency spreading depths (1.5% typical and up to around 10%) and rates (30KHz typical). The outputs are 50% duty cycle for all output divider values.
Key Features
- Designed for PC, networking, and consumer-electronics applications where spread-spectrum clock sources are required to satisfy FCC requirements for peak RF spectral emissions.
- Bandwidth, spreading rate, and spreading amount are precisely adjustable to allow the designer to dial-in the desired characteristics.
- Feedback divider with 8 fractional bits allows the frequency to be set more precisely when the bandwidth is reduced.
Deliverables
- GDSII (100% DRC and LVS clean)
- LVS Spice netlist
- Verilog model
- Synopsys synthesis model
- LEF for clock generator PLL
- User Guidelines including:
- integration guidelines,
- layout guidelines,
- testability guidelines,
- packaging guidelines,
- board-level guidelines
Technical Specifications
Foundry, Node
GF L013LP
GLOBALFOUNDRIES
Pre-Silicon:
130nm
LP