Regulator IP for TSMC

Compare 89 Regulator IP for TSMC from 5 vendors (1 - 10)

Linear Regulator, ultra low quiescent current for retention mode TSMC 40uLPeF
- qLR-Aubrey-ref-1.62-3.63-0.55-2.5.02_TSMC_40_uLPeF is an ultra-low quiescent LDO (Linear regulator) in TSMC 40uLPeF.
Linear Regulator, ultra low quiescent current for retention mode
- Very low quiescent and leakage for Low-Power
- Retention capability enables optimization of the power consumption depending on the modes and needs of the SoC
- Can supply always-on very low loads
- Low Bill-of-Material: supports external capacitor if required by the system
Combined Power-On-Reset and Brown-Out-Reset in TSMC 22ULL
- Can be used to monitor 3.3V battery or voltage regulator output
- Monitored input voltage programmable from 0.55V to 3.3V
- Dual POR and BOR functions
- Low power mode for best consumption in sleep mode
Low input voltage high performance LDO regulator in TSMC 22ULL
- LDO-T22-1-1.8-0.6-1.05_TSMC_22_ULL is a Low input voltage, high performance LDO linear regulator in TSMC 22ULL with programmable output voltage to supply core logic domains, SRAM arrays or RF/analog domains.
- It features normal and low-power (LP) operating modes to adjust the amount of output current depending on the application requirements.
DC/DC buck converter in TSMC 40ULP with low quiescent current and high efficiency at light load
- Low quiescent current suitable for standby modes
- High efficiency at light load extending battery lifetime
- Low ripple level compatible with noise sensitive loads
- Low BoM cost: 1 µH inductor
50mA CMOS buck regulator - TSMC 0.18µ
- Input voltage range 3.0V – 5.5V.
- Output voltage 1.8V ±5%.
- 89% efficiency at 50mA.
LDO voltage regulator
- TSMC BiCMOS SiGe 180 nm
- Low drop out
- Low current consumption
- Output voltage digital adjustment
5 mA LDO voltage regulator (output voltage 1.1V/1.2V/1.3V/1.4V)
- TSMC CMOS 55nm
- High precision stabilization voltage
- Wide input voltage range from 2.25V to 3.6V
- Output voltage value: 1.1V, 1.2V, 1.3V, 1.4V
10 mA LDO voltage regulator (output voltage 1.8 V)
- TSMC BiCMOS SiGe 180 nm
- Low drop out
- Low current consumption
- Portable to other technologies (upon request)
Retention Alternative Regulator, combines high efficiency in normal mode and ultra-low quiescent current for sleep mode
- - Single input voltage supporting 1.62 V to 3.63 V
- - Junction temperature range from -40°C to 125°C
- - Manages booting and transitions between embedded regulators
- - Enables high power and low power operating modes