Power Management IP for TSMC
Welcome to the ultimate Power Management IP for TSMC hub! Explore our vast directory of Power Management IP for TSMC
All offers in
Power Management IP
for TSMC
Filter
Compare
30
Power Management IP
for TSMC
from 10 vendors
(1
-
10)
Filter:
- 28nm
-
Digital Cell Library TSMC
- Compact standard cell library targeting a wide range of foundries and processes
-
IR DROP TSMC
- • Active current current: 120uA
- • Powered-down current: <1uA
- • Detection time: 25nS typ.
- • Hysteresis: 20mV typ.
-
Bandgap Voltage / Current Reference TSMC
- Input Voltage Range: PDK VddIO
- Programmable Output Voltage Range
- Untrimmed Accuracy: 5%
- Trimmed Accuracy (single point trim): 0.5%
-
Power-On-Reset TSMC
- Start-up Time: max 10us
- Configurable Threshold
- Programmable Delay
- Uses Hysteresis to avoid false resets in noisy environments
-
Linear LDO Low-Dropout Voltage Regulator TSMC
- Input Voltage Range: PDK VddIO
- Programmable Output Voltage Range
- Current Load: <1mA to 100mA
- PSRR
-
Process/Voltage/Temperature Sensor (Supply voltage 1.8V/0.9V)
- High accuracy temperature and voltage measurements
- Process detector for all-voltage threshold MOS transistors
- Up to 16 remote temperature/voltage sensors
-
Process/Voltage/Temperature Sensor (Supply voltage 1.8V/0.9V)
- TSMC 28nm 28HPC CMOS
- High accuracy temperature and voltage measurements
- Process detector for all-voltage threshold MOS transistors
- Up to 16 remote temperature/voltage sensors
-
Power management unit (0.9V, 1.8V, 3.3V output voltages, 1.2V reference voltage and 10uA/1uA reference currents)
- TSMC 28nm eFlash technology
- Bandgap output voltage 1.2V
- Bandgap output voltage accuracy without trimming ±3% @5.0V
-
Scalable, On-Die Voltage Regulation
- Droop and DFS/DVFS response profile
- Programmable droop and DFS/DVFS response rate
-
Low Dropout (LDO) Capless Regulator
- Input voltage of 1.2V
- Output voltage of 0.8V to 0.95V
- Up to 250mA output current
- Stable with on-chip capacitor up to 1nF capacitance