Voltage Regulator IP for GLOBALFOUNDRIES

Compare 60 Voltage Regulator IP for GLOBALFOUNDRIES from 10 vendors (1 - 10)

10mA to 265mA Linear Li-Ion Battery Charger - GlobalFoundries - 0.130um BCD
- 10mA to 265mA charging current
- 3.3V to 4.35V termination voltage
- Power and charging status indicators
Capless low input voltage LDO in GF 22FDX
- GlobalFoundries 22FDX
- Low silicon area
- Low BoM cost, no output capacitor required
Retention Alternative Regulator, combines high efficiency in normal mode and ultra-low quiescent current for sleep mode
- Ideal regulator for power and voltage islets
- Embedded RCU (Regulator Control Unit) to manage booting and mode transitions and to ensure data integrity
- Configurable output drive before delivery to fit the application
- High Efficiency (up to 95% peak efficiency)
Linear Regulator for digital island
- Low dropout: 380mV of dropout at ILOAD= IMAX
- Low Bill-of-Material: optimized in density for the best trade-off for the given output current and input voltage range
- A cost-efficient solution compared to external Power Management
- Behavioral models: ease of integration in SoC and optimization of Power Management Network (PMNet) using models to verify mode transitions as well as noise propagation
Switching regulator, inductor-based, PWM mode, high efficiency
- High efficiency buck regulator (up to 95% peak), over wide load current range
- Pulse With Modulation (PWM) mode enabling to master the frequency response
- Automatic mode change of the Power Stage Unit, maintaining high-efficiency at low load current
- Low Bill-Of-Material: fully integrated feedback and active compensation loop do not require additional external passive components.
40 mA LDO voltage regulator (3.3/5.0V to 1.8V)
- TSMC 180nm technology
- 1.8V output voltage
- Output voltage trimming
- Maximum output load 40mA
50mA capacitor-less LDO voltage regulator (output voltage 0.5V to 0.8V)
- GF 22nm FDX
- 0.72V – 1.2V input voltage range
- Programmable output voltage from 0.5 to 0.8V
- Normal and LP modes
IR DROP SMIC
- Active current current: 120uA
- Powered-down current: <1uA
- Detection time: 25nS typ.
- Hysteresis: 20mV typ.
IR DROP GlobalFoundries
- • Active current current: 120uA
- • Powered-down current: <1uA
- • Detection time: 25nS typ.
- • Hysteresis: 20mV typ.
Power-On-Reset GlobalFoundries
- Start-up Time: max 10us
- Configurable Threshold
- Programmable Delay
- Uses Hysteresis to avoid false resets in noisy environments