USB 2.0 PHY IP, Silicon Proven in SMIC 12SF++

Overview

A full physical layer (PHY) IP solution designed for outstanding performance and minimal power consumption is the USB2.0 PHY IP. The USB2.0 IP implements the High-Speed USB 2.0 transceiver, which can be used with hosts, devices, or OTG function controllers. The USB2.0 PHY IP, which supports both Full-Speed (12 Mbps) and Low-Speed (1.5 Mbps) data rates, comes after the UTMI+ level 3 specification. 480Mbps of high-speed data can be transferred by combining numerous mixed-signal circuits. The enhanced USB Battery Charging standards, which are designed for mobile and consumer product applications, are also supported by the USB2.0 PHY IP. Small chip size and low power consumption of the USB2.0 PHY IP transceiver did not compromise performance or data throughput. The USB2.0 PHY IP contains a full on-chip physical transceiver solution with Electrostatic Discharge (ESD) protection, a clock generating block provided by an internal PLL, and a resistor termination calibration circuit in order to fully enable host and device functionality.

Key Features

Compliant with USB2.0 and USB1.1 specification
Compliant with UTMI Specification Version level 3.
Supports HS(480Mbps)/FS(12Mbps) /LS(1.5Mbps) modes
All required terminations, including 1.5Kohm pullup on DP and DM, and 15Kohm pull-down on DP and DM are internal to chip
16-bit, 30MHz or 8-bit, 60MHz parallel interface for HS/FS
Serializing for transmitting data stream and Deserializing for receiving data stream
USB Data Recovery and Clock Recovery on receiving
Integrated Bit Stuffing and NRZI encoding for Transmit
Integrated Bit Un-Stuffing and NRZI decoding for Receive
SYNC and EOP generation on transmit packets and detection on receive packets
Internal reference resistor that replaces the external reference resistor
Built in self test for production testing
Supports USB suspend state and remote wakeup
Supports detection of USB reset, suspend and resume signaling
Supports high speed identification and detection as defined by USB 2.0 Specification
Support high speed host disconnection detection
Silicon Proven in SMIC 12SF++

Block Diagram

Deliverables

Application Note / User Manual
Behavior model, and protected RTL codes
Protected Post layout netlist and Standard
Delay Format (SDF)
Frame view (LEF)
Metal GDS (GDSII)
Test patterns and Test Documentation

Technical Specifications

Maturity

In Production

Availability

Immediate

Request Info