TSMC CLN40FLOD 40nm Spread Spectrum PLL - 300MHz-1500MHz
Overview
The Spread Spectrum PLL is designed to multiply an input clock by a fixed-point number between 92 and 184 with frequency spreading capability suitable for PC and consumer electronics applications that require low EMI. It does not provide any deskew functionality. It contains a 1-64 divider at the reference clock input, a 1-256 or larger integer divider and a 1-256 or larger fractional divider in the internal feedback path, with as many as 4 bits of precise fractional-N control, and a 1-8 divider at the output. It can generate precise and adjustable frequency spreading depths (1.5% typical and up to around 10%) and rates (30KHz typical). The outputs are 50% duty cycle for all output divider values.
Key Features
- Designed for PC, networking, and consumer-electronics applications where spread-spectrum clock sources are required to satisfy FCC requirements for peak RF spectral emissions.
- Spreading rate and spreading depth are precisely adjustable to allow the designer to dial-in the desired characteristics.
- 15-bit fractional-N feedback divider with 4 bits of precise control.
- Available with multi-phase outputs.
Deliverables
- GDSII (100% DRC and LVS clean)- LVS Spice netlist- Verilog model- Synopsys synthesis model- LEF for clock generator PLL- User Guidelines including:
- integration guidelines,
- layout guidelines,
- testability guidelines,
- packaging guidelines,
- board-level guidelines
Technical Specifications
Foundry, Node
TSMC CLN40FLOD
TSMC
Pre-Silicon:
40nm
G
,
40nm
LP
Related IPs
- IGAPLLV01A, TSMC CLN16FF+LL Spread Spectrum Clock Generator PLL
- TSMC CLN40ULPOD 40nm Spread Spectrum PLL - 300MHz-1500MHz
- IGAPLLT06A, TSMC CLN28HPM/CLN28HPC+ Spread Spectrum PLL
- Analog PLL For Spread Spectrum Clock
- TSMC CLN40FLOD 40nm Spread Spectrum PLL - 150MHz-750MHz
- TSMC CLN40FLOD 40nm Spread Spectrum PLL - 75MHz-375MHz