VinSDHC3_0 SD Host Controller Core controls data transfers between the SD Host System and the SD Memory Card sockets. It is compliant with the standard SD Controller Specification version 3.0.
The Controller core supports standard SD Memory Card as well as SD High Capacity Card. The use of register-based configuration makes it very easy to integrate it in wide range of applications.
SD Memory Card Host Controller
Overview
Key Features
- Supports ADMA2 mode
- Supports UHS-I modes (SDR12,SDR25,SDR50, SDR104)
- Supports DDR50 (Dual Data Rate) mode
- Supports Host clock frequency from 0 to 50 MHz
- Supports both hardware and wakeup interrupts
- Two ping pong access memories (512 bytes of each)
- Supports SD High Capacity and Standard Capacity cards
- CRC7 and CRC16 modules for generation and verification
- Multiple block transfer support
- Variable SD Clock frequency selection through software
- Supports event generation by software through Test registers
- Compatible with SD Specification Version 3.0
- Supports DMA Interface for Data transfer (ADMA2 Mode)
- Supports both SD Memory and MMC Cards
- AHB compliant System Bus Interface
- Support for hardware interrupt driven functionality
- Supports both SD 1-bit and 4-bit modes for data transfer
- Supports UHS (Ultra High Speed) modes
Technical Specifications
Availability
Now
Related IPs
- SD Card Host Interface
- SDRAM DDRx & LPDDR4x Host Controller & PHY - TSMC 12nm 12FFC,FFC+
- SDRAM LPDDR5/4x/4/3/2 Host Controller & PHY - TSMC 16nm 16FFC,FF
- ISA / PC Card / PCMCIA CompactFlash Controller
- SD Card Host Controller
- SD Host Controller IP, SD host spec. v3.0, SDIO spec. v2.0, MMC spec. v4.3, Supports UHS50/UHS104 card, Soft IP